| Info: | Timeout [usec] |
| Data type: | UDINT |
Description:
To transfer a parameter value to the ACOPOS, the NC manager first enters a Read or Write Request in the cyclic POWERLINK frame to the ACOPOS. This error is displayed if the corresponding Read or Write Response data in the cyclic POWERLINK frame from the ACOPOS have not been received after a specific amount of time.
Reaction:
Resets the interface of the corresponding read or write channel.
Cause/Remedy:
Overload, malfunction or interruption of the network connection or ACOPOS failure.
See also error number 1004.
See also error number 1012.