| Info: | |
| Data type: |
Description:
To transfer a parameter value to the ACOPOS, the NC manager first enters a Read or Write Request with a certain counter value in the cyclic POWERLINK frame to the ACOPOS. This error is displayed if Read or Write Response data with another counter value than expected are contained in the cyclic POWERLINK frame from the ACOPOS.
Reaction:
Resets the interface of the corresponding read or write channel.
Cause/Remedy:
Overload, malfunction or interruption of the network connection or ACOPOS failure.
See also error number 1004.
See also error number 1012.