| Info: | |
| Data type: |
Description:
For NC actions for data block upload/download only parameter IDs with the data type "UINT" may be used for the parameter "parameter.idx1_par_id". If this is not the case, this error is displayed.
In addition, this error is displayed if "parameter.datblock_par_id" is set to "AUT_POLY_DATA" and "parameter.idx1_par_id" to a value other than "AUT_DATA_INDEX".
Reaction:
Processing of the corresponding NC action is aborted.
Cause/Remedy:
Use parameter IDs with the data type "UINT".