| Info: | Parameter ID |
| Data type: | UINT |
Description:
For the NC action "ncSETUP, ncSTART" the input parameters are read from an ACOPOS parameter table. If this ACOPOS parameter table contains a parameter ID with more than 6 bytes parameter data, then this error is displayed with this parameter ID as info.
Reaction:
Processing of this NC action is aborted.
Cause/Remedy:
Do not use parameter IDs with more than 6 Bytes parameter data in the ACOPOS parameter table with the input parameters for the NC action "ncSETUP, ncSTART".