| Info: | |
| Data type: |
Description:
Configuration error of the encoder unit system.
The additional information (Info1) shows the details:
0x00000000 ... The configured unit system has a higher resolution than the increment resolution of the encoder.
0x00000001 ... The configured unit system does not allow proper speed calculation.
0x00000002 ... The configured unit system dows not allow proper internal accerlation calculation.
0x00000011 ... The configured unit system does not allow proper speed calculation.
0x00000012 ... The configured unit system dows not allow proper internal accerlation calculation.
Reaction:
The module changes into Fail Safe state.
Cause/Remedy:
Check the configuration of the encoder unit system in the SafeDESIGNER!
Carry out a Power Down/Power Up cycle!