| Info: | |
| Data type: |
Description:
Configuration error of the safe speed observers SSO. A not allowed safety function is activated.
The additional information (Info1) shows the details:
The following pins are not allowed to connect at the FB:
0x00000100 ... S_Control_SOS
0x00000200 ... S_Control_SS2
0x00000400 ... S_Control_SLA
0x00010000 ..._S_Control_SDI-POS
0x00020000 ... S_Control_SDI-NEG
0x00040000 ... S_Control_SLI
0x00080000 ... S_Control_SBT
0x08000000 ... S_Control_SLP
If more than one not allowed pin is connected, the additional information (Info1) contains the sum of the single additional information.
Reaction:
The module changes into Fail Safe state.
Cause/Remedy:
Correct the configuration in SafeDESIGNER and carry out a Power Down/Power Up cycle!