| Info: | Output signal |
| Data type: | UDINT |
Description:
Error in the safe outputs in the module state PreOperational.
Not all output feedbacks 0 at PreOp.
Info1= output feedback states
BIT 0 .. STO1 low side
BIT 1 .. STO1 high side
BIT 2 .. STO2 low side
BIT 3 .. STO2 high side
BIT 4 .. SBC low side
BIT 5 .. SBC high side
Offset information for safety logger:
binary data[20..17]: Info1
Reaction:
The module changes into Fail Safe state.
Cause/Remedy:
Check the wiring!