| Info: | Additional info |
| Data type: | UDINT |
Description:
Internal runtime error caused by the voltage monitoring.
The additional information (Info1) shows the details:
0x0001 ... Error while getting data from ADCs
0x0002 ... Voltage out of range (0xiivvvv02: ii.. index [mux = ii & 0x80, chl = ii & 0x7F], vvvv.. value)
0x0003 ... Wrong case
0x0004 ... Conversion not cleared for all channels
0x0005 ... Watchdog error
0x0006 ... Channel configuration is worng
0x0007 ... Too many differential channels are configured
0x0008 ... AFEC DMA transfer busy
0x0009 ... Error while getting data from AFEC Bank 0
0x000A ... Error while getting data from AFEC Bank 1
0x1100 ... Error in first function call in PreOperational
0x1200 ... Error in second function call in PreOperational
0x1300 ... Error in third function call in PreOperational
0x2100 ... Error in first function call in Operational
0x2200 ... Error in second function call in Operational
0x2300 ... Error in third function call in Operational
Offset information for safety logger:
binary data[20..17]: Info1
Reaction:
The module changes into Fail Safe state.
Cause/Remedy:
Please send the additional information to the technical support for further analysis!