| Info: | Additional info |
| Data type: | UDINT |
Description:
An error occurred in ADC compensation Flash data.
0x0001...CRC16 of current ADC compensation flash data is wrong!
0x0002...CRC16 of ADC compensation flash data is wrong!
0x0004...Minorant and/or majorant of ADC compensation flash data is incompatible!
0x0005...Data type of given ADC raw value is wrong!
0x0006...Data type of given ADC validation value is wrong!
0x0007...Timeout - ADC compensation / validation not yet started!
0x0008...Validation on PG110 has not been done!
0x0009...Alignment of address is wrong!
0x000A...Validation CRC is wrong!
Offset information for safety logger:
binary data[20..17]: Info1
Reaction:
The module changes into Fail Safe state.
Cause/Remedy:
Call technical support!