| Info: | Additional info |
| Data type: | UDINT |
Description:
Internal runtime error caused by SinCos efficiency tests.
The additional information (Info1) shows the details:
0x0000 ... ET1 (Test of nominal tolerance upper limit) failed
0x0001 ... ET2 (Test of nominal tolerance lower limit) failed
0x0002 ... ET3 (Test of adaptive vector control tolerance upper limit) failed
0x0003 ... ET4 (Test of adaptive vector control tolerance lower limit) failed
0x0004 ... ET5 (Test of ADC sample monitoring) failed
0x0005 ... ET6 (Test of not int200 monitoring upper limit) failed
0x0006 ... ET7 (Test of not int200 monitoring lower limit) failed
0x0007 ... ET8 (Test of pulse width monitoring) failed
0x0008 ... ET9 (Test of watch dog drift upper limit) failed
0x0009 ... ET10 (Test of watch dog drift lower limit) failed
0x000A ... Timeout
0x000B ... Test active without request
Offset information for safety logger:
binary data[20..17]: Info1
Reaction:
The module changes into Fail Safe state.
Cause/Remedy:
Call technical support!