| Info: | Additional info |
| Data type: | UDINT |
Description:
Error in HIPERFACE DSL configuration.
The additional information (Info1) shows the details:
0x00000001 ... A "HDSL - Encoder" is not defined although the "Encoder Interface" is set to "HIPERFACE DSL" and the encoder is used for safety purposes.
0x00000002 ... The "HDSL - Encoder" index is out of range
Offset information for safety logger:
binary data[20..17]: Info1
Reaction:
The module changes into Fail Safe state.
Cause/Remedy:
The parameter "HDSL Encoder" must be defined if the parameter "Encoder Interface" is set to "HIPERFACE DSL" and
the encoder is used in a safety-related manner i.e. "EUS - Encoder type" is set to "Encoder used".
Check the parameters in the SafeDESIGNER or the SafeCommissioning parameters!