| Info: | Additional info |
| Data type: | UDINT |
Description:
The configured parameters "Safe Encoder Interace" and "Encoder protocol type" are incompatible to each other.
Offset information for safety logger:
Binärdaten[20..17]: Info1
Reaction:
The module changes into Fail Safe state.
Cause/Remedy:
The parameters "Safe Encoder Interface" and "Encoder protocol type" have to match.
Check the parameter "Encoder protocol type" in the SafeDESIGNER or in the SafeCommissioning parameters!
Check the parameter "Safe Encoder Interface" in the encoder configuration of the inverter module!