| Info: | Additional info |
| Data type: | UDINT |
Description:
This error occurs if safe machine options are activated but the SafeLOGIC does not hold the appropriate safe machine options for this SafeMOTION.
Module or the data transmission was not successful. The SafeMOTION module attempts to request the data from the SafeLOGIC again.
The module does not change to state "Operational". This procedure repeats until the appropriate data is available on the SafeLOGIC.
Reaction:
The module does not change to state "Operational"
Cause/Remedy:
Check if the SCM holds safe machine options. Either disable the safe machin options or transfer safe machine options to the SafeLOGIC.