| Info: | Detail information |
| Data type: | UDINT |
Description:
The ADC compensation for the measurement of the current and / or the encoder input was not done completely.
The additional information (Info1) shows the details.
0x0001...No compensation data stored in FLASH!
0x0003...Module is sent to operational without full validation of ADC compensation!
0x0004...ADC compensation is incomplete!
0x0005...Validation of ADC compensation has not been finished, module stays in preop!
Offset information for safety logger:
binary data[20..17]: Info1
Reaction:
A warning is created!
Cause/Remedy:
Call technical support!