| Info: | |
| Data type: |
Description:
Error at the encoder input. "EUS - Encoder acceleration limit" exceeded!
Reaction:
The status S_SafePositionValid/S_Status_Homing is set to FALSE.
The status S_NotErrENC/S_Status_EncStatus is set to FALSE.
If a safety function is used which needs an encoder, then the module changes into Functional Fail Safe state.
Cause/Remedy:
The connection between the motor and encoder can slip through.
Check the parameter "EUS - Encoder acceleration limit"!
Reduce the encoder acceleration!
Check the mechanical connection between the encoder and the motor!