| Info: | Encoder |
| Data type: | USINT |
Description:
Runtime error in an encoder with activated monitor (activation, see error number 7030).
Reaction:
None
Cause/Remedy:
The incremental determined position deviates from the serially transmitted position.
Outside the measurement range (linear encoder).
See also error number 7030.
Error in the multi-turn range.
If part of the multi-turn range is incorrectly mapped, the absolute position can be wrong,
when e.g. in this field a restart occurs.
Verification of the encoder by measuring the absolute position after a restart. Afterwards
check by moving through the entire multi-turn region.