| Info: | Encoder |
| Data type: | USINT |
Description:
This status is reported by the HIPERFACE DSLŪ Master IP-Core. More information can be found in the encoder data sheet or the HIPERFACE DSLŪ specification.
Excerpt from the HIPERFACE DSLŪ specification for Online Status Bit 11:
A source of an error in the fast position was identified or an alignment procedure is currently being carried out.
It is probable that the last fast position is invalid.
Be aware that the fast position read through drive interface is provided by the estimator.
Reaction:
See error number 7030.
Cause/Remedy:
See encoder data sheet or HIPERFACE DSLŪ specification.