| Info: | Encoder |
| Data type: | USINT |
Description:
This status is reported by the HIPERFACEŽ encoder. More information can be found in the data sheet or HIPERFACEŽ encoder specification.
Excerpt from the HIPERFACEŽ specification:
During operation, "Read-only data field" indicates that the HIPERFACEŽ slave has received a "Store data" request that either targets a data field with the "read-only" setting or the "Extended type label".
The message will not be parsed further in this case.
Reaction:
None
Cause/Remedy:
See encoder data sheet or HIPERFACEŽ specification.