| Info: | Encoder |
| Data type: | USINT |
Description:
This status is reported by the HIPERFACEŽ encoder. More information can be found in the data sheet or HIPERFACEŽ encoder specification.
Excerpt from the HIPERFACEŽ specification:
During operation, "Wrong data field offset" indicates that the HIPERFACEŽ slave has received a master request message to read or write in a data field with an offset outside the data field size.
The indication is also used if a read access to the extended type label uses an offset outside the type label size (64 bytes).
The message will not be parsed further in this case.
Reaction:
None
Cause/Remedy:
See encoder data sheet or HIPERFACEŽ specification.