| Info: | Encoder |
| Data type: | USINT |
Description:
This status is reported by the HIPERFACE DSLŪ encoder. More information can be found in the encoder data sheet or the HIPERFACE DSLŪ specification.
Excerpt from the HIPERFACE DSLŪ specification for encoder status 3 (ENC_ST3, Adresse 43h) bit 0:
Encoder temperature was out of the specification
Reaction:
See error number 7030.
Cause/Remedy:
See encoder data sheet or HIPERFACE DSLŪ specification.
Excerpt from the HIPERFACE DSLŪ specification:
No action required;
check application for potential motor/encoder cool down