| Info: | Encoder |
| Data type: | USINT |
Description:
This status is reported by the HIPERFACE DSLŪ encoder. More information can be found in the encoder data sheet or the HIPERFACE DSLŪ specification.
Excerpt from the HIPERFACE DSLŪ specification for encoder status 3 (ENC_ST3, Adresse 43h) bit 6:
During monitoring of an internal electronic, an error was identified.
Reaction:
See error number 7030.
Cause/Remedy:
See encoder data sheet or HIPERFACE DSLŪ specification.
Excerpt from the HIPERFACE DSLŪ specification:
No action required.
Encoder might recover automatically.
If error persists even after clearing, potential hardware failures are present and immediate replacement of the encoder is required!