| Info: | Encoder |
| Data type: | USINT |
Description:
This status is reported by the HIPERFACE DSLŪ encoder. More information can be found in the encoder data sheet or the HIPERFACE DSLŪ specification.
Excerpt from the HIPERFACE DSLŪ specification for encoder status 4 (ENC_ST4, Adresse 44h) bit 2:
Error when accessing an internal resource.
Potential cause: may indicate EMC problems, excessive number of EEPROM write cycles or wrong timing of power cycle vs. EEPROM write access or just simply incorrect access parameters.
Reaction:
See error number 7030.
Cause/Remedy:
See encoder data sheet or HIPERFACE DSLŪ specification.
Excerpt from the HIPERFACE DSLŪ specification:
Check and retry command; check resource access sequence.