| Info: | NetCyc cycle time [usec] |
| Data type: | UDINT |
Description:
Depending on the configuration, the optional NetCyc function performs the following sub-functions:
- Accelerated transfer of parameter lists
- Parallel transfer of cam data
If the cycle time ratio between NetCyc function and POWERLINK "multiplexed" (POWERLINK cycle time multiplied by the factor "multiplexing prescale") is not integer, then this warning is output with the NetCyc cycle time as info. In addition, further details are entered in the Logger.
Reaction:
The NetCyc function is disabled for this ACOPOS module.
Cause/Remedy:
Change the factor "Multiplexing prescale" in the POWERLINK configuration to a value that will make the cycle time ratio integer.