| Info: | Encoder |
| Data type: | USINT |
Description:
Runtime error in an incremental encoder with activated monitor (activation, see error number 7030). Each edge of the quadrature signal (A/B incremental encoder signals) is evaluated. The limit value for the time interval between two edges was not reached.
Reaction:
See error number 7030.
Cause/Remedy:
Encoder speed too high.
Max. counter frequency (ENCOD_OUTPUT_FREQUENCY) ist set to low (8BAC0123.00x-1 and 80VD100PD.C144-01).
Encoder connection is interrupted or defective. See wiring guidelines error number 7030.
The phase shift between signal A and B is not equal to 90 degrees
Encoder vibrations.
Encoder defective.
Plug-in card defective.