| Info: | Encoder |
| Data type: | USINT |
Description:
Encoder power consumption has dropped below a specified level.
Reaction:
See error number 7030.
Cause/Remedy:
If the encoder is powered externally, this monitoring must be switched off. See parameter PARID_ENCOD_LINE_CHK_IGNORE.
No encoder supply or supply contains an error.
+5V, +24V or COM not connected.
See wiring guidelines error number 7030.
Encoder/Module defective.
Encoder power consumption < 150mW (5V)
Encoder power consumption < 200mW (24V)