| Info: | Parameter ID |
| Data type: | 'PARID' |
Description:
Runtime error while boot up. The value of the parameter (ParID see INFO) in the user device configuration data is not valid.
The user device configuration data is permanently stored in nonvolatile memory (e.g., FRAM).
Reaction:
The parameter is not read from the user device configuration data but reset to the factory default.
The parameter error is additionally entered as runtime error.
Cause/Remedy:
Due to a firmware change or hardware change, the parameter value in the user device configuration data is no longer compatible with the firmware or hardware.
The parameter (ParID see INFO) must be set to a valid value.