Sanghoon.Kim 2026-03-16T01:07:28.420954Z [UPDATE] UF.501.003.000.261 update missing bindings Sanghoon.Kim 2026-03-11T07:46:26.406585Z [REVERT] UF.501.003.000.260 revert revision UF.501.003.000.252 add synchronized movement, merges from trunk Sanghoon.Kim 2026-03-11T06:33:58.644667Z [UPDATE] UF.501.003.000.259 PID update during auto/semi, Fixed encoder resolution for KEBA ........Merged revision(s) 3790 from beta/UF.510.003.001-BETA: Sanghoon.Kim 2026-03-11T06:23:34.312876Z [update] UF.501.003.000.258 Skip Robot Mold Open Signal (merged from 3714) ........Merged revision(s) 3771 from beta/UF.510.003.001-BETA: Sanghoon.Kim 2026-03-11T06:10:44.546938Z [UPDATE] UF.501.003.000.257 force the alarm setting for the production target reached alarm. ........Merged revision(s) 3785 from beta/UF.510.003.001-BETA: Sanghoon.Kim 2026-03-11T06:06:21.187836Z [UPDATE] UF.501.003.000.256 update for display daylight length (Max Clamp Stroke) ........Merged revision(s) 3791 from beta/UF.510.003.001-BETA: Sanghoon.Kim 2026-03-11T06:04:35.219881Z [BUGFIX] UF.501.003.000.255 bugfix ejector stroke min max ........Merged revision(s) 3794 from beta/UF.510.003.001-BETA: Sanghoon.Kim 2026-03-11T06:00:56.903830Z [BUGFIX] UF.501.003.000.254 bugfix of screw reverse rotation Merged revision(s) 3835 from beta/UF.510.003.001-BETA: ........ Amin.Adra 2026-02-23T09:40:25.330686Z [BUGFIX] UF.501.003.000.253 Merged revision(s) 3757 from trunk: Robot Alarms Moritz.Wurian 2026-02-20T08:58:48.354041Z [UPDATE] UF.501.003.000.252 add synchronized movement, merges from trunk Amin.Adra 2026-02-18T12:40:52.492184Z [BUGFIX]UF.501.003.000.251 Merged revision(s) 3751 from trunk: Robot Interlocks Patrik.Tasch 2026-02-12T06:31:36.540251Z [BUGFIX]UF.501.003.000.250 Ejector Endposition tolerance Amin.Adra 2026-02-10T12:23:59.487348Z [UPDATE] UF.501.003.000.249 Merged revision(s) 3733 from trunk: Rotary Add limit switch for end position philipp.seyser 2026-02-05T10:09:56.210049Z [UPDATE] UF.501.003.000.248 delete Option 07A020 - Additional Panel Amin.Adra 2026-02-04T08:35:51.540968Z [FIX] UF.501.003.000.247 Act-page global variable Amin.Adra 2026-02-02T11:59:54.176641Z [UPDATE] UF.501.003.000.246 Merged revision(s) 3076 from trunk: Enable core in main chain : Display warning message if the page is main chain page and the mode is not automatic philipp.seyser 2026-02-02T11:00:04.906937Z [ADD] UF.501.003.000.245 Add Extended Buttons Panel Amin.Adra 2026-02-02T10:39:30.526677Z [UPDATE] UF.501.003.000.244 Merged revision(s) 3702, 3703 from trunk: [Update] Airblow stop when cycle end Amin.Adra 2026-02-02T07:55:14.313902Z [UPDATE] UF.501.003.000.243 Merged revision(s) 3694, 3699 from trunk: [Update] Enable core in main chain Sanghoon.Kim 2026-01-27T14:59:28.384258Z [UPDATE] UF.501.003.000.242 Improve the valve gate output on manual mode (some times valve could not reset) Moritz.Wurian 2025-12-16T15:22:38.659308Z [BUGFIX]UF.501.003.000.241 type error Sanghoon.Kim 2025-12-16T15:11:42.190141Z [REVERT] UF.501.003.000.240 revert the UF.501.003.000.239 automatic calculation of SsML TaeHwanRow 2025-12-16T10:24:04.295390Z [UPDATE]UF.501.003.000.240 Breaking Profile for IPB, delay for automatic motor start in semi Patrik.Tasch 2025-12-15T15:25:48.049791Z [UPDATE]UF.501.003.000.239 automatic calculation of SsML Sanghoon.Kim 2025-12-12T10:26:26.843644Z [BUGFIX] UF.501.003.000.238 Bugfix of PID positioning of Injection B : Merged revision(s) 3528 from trunk: Sanghoon.Kim 2025-12-12T10:01:17.240092Z [BUGFIX] UF.501.003.000.237 KEB SDO InitUp (Partly merge from SVN.3293 on Trunk) Sanghoon.Kim 2025-12-11T13:04:30.994958Z [UPDATE] UF.501.003.000.236 Improve the injection pressure scale 2 Sanghoon.Kim 2025-12-11T12:52:03.172479Z [UPDATE] UF.501.003.000.235 Improve the injection pressure scale Sanghoon.Kim 2025-11-28T12:36:00.017580Z [BUGFIX] UF.501.003.000.234 Merged revision(s) 3463 from trunk:[BUGFIX]Datatype mismatch Sanghoon.Kim 2025-11-21T13:28:12.802232Z [BUGFIX] UF.501.003.000.233 The last cycle time displayed 0 (the actual time already reset during data copy) Merged revision(s) 3429 from trunk: Sanghoon.Kim 2025-11-05T17:16:36.190908Z [BUGFIX] UF.501.003.000.232 Recover wrong reverted part on Rev.3077 Patrik.Tasch 2025-10-30T07:33:32.734723Z [BUGFIX].UF.501.003.000.231 Advanced Mold Protection Patrik.Tasch 2025-10-29T09:37:05.676435Z [BUGFIX] UF.501.003.000.230 Injection Graph negativ speed (V) Patrik.Tasch 2025-10-29T09:24:21.398385Z [BUGFIX]-UF.501.003.000.229 Injection Graph negativ speed (V) Patrik.Tasch 2025-10-28T09:20:19.482397Z [UPDATE]-UF.501.003.000.228 Ejector Parallel (V) Patrik.Tasch 2025-10-24T09:11:50.353611Z [UPDATE]-UF.501.003.000.227 Core Pulse HIGH/LOW Active (V) Patrik.Tasch 2025-10-22T07:34:44.298169Z [UPDATE]-UF.501.003.000.226 Decompression Valve for Vertical Injection Unit (TH/VH) (V) Patrik.Tasch 2025-10-21T10:46:08.228962Z [UPDATE]UF.501.003.000.225 Limit MH adjustment parameter (v) Patrik.Tasch 2025-10-17T09:48:49.766260Z [BUGFIX]-UF.501.003.000.224 Max Torque Limit for Plastification (V) Patrik.Tasch 2025-10-14T09:56:10.084204Z [BUGFIX]UF.501.003.000.223 Mould Protection (V) Patrik.Tasch 2025-10-14T09:19:22.550198Z [BUGFIX]-UF.501.003.000.222 Memory leak during Mould Close at Mould Protection (V) Patrik.Tasch 2025-10-13T12:38:52.524849Z [BUGFIX].UF.501.003.000.221 cycle time for SPC Table (V) Patrik.Tasch 2025-10-13T12:37:32.332608Z [BUGFIX].UF.501.003.000.220 SW Update (V) Felix.Neunkirchner 2025-10-08T10:18:48.606322Z [UPDATE]UF.501.003.000.220 - fixed integer value bug (v) Patrik.Tasch 2025-10-08T09:36:49.675522Z [UPDATE].UF.501.003.000.219 Core Movement with Pulse (V) Felix.Neunkirchner 2025-10-08T09:29:58.571776Z [UPDATE] UF.501.003.000.218 wjDynAut - fixed integer value bug (v) Felix.Neunkirchner 2025-10-08T08:51:45.476736Z [UPDATE] UF.501.003.000.217 wjDynAut - set limits for pulse input (v) Felix.Neunkirchner 2025-10-07T13:51:40.801578Z [UPDATE] UF.501.003.000.216 wjDynAut - added integerVariable1, integerVariable2, integerVariable3 (v) Moritz.Wurian 2025-10-07T12:34:37.513356Z [BUGFIX] UF.501.003.000.215 Fix for SDO InitUp (v) Amin.Adra 2025-10-03T07:13:54.517697Z [BUGFIX] UF.501.003.000.214 Merged revision(s) 3144,3262,3265,3275 from trunk: Quality Table in Semi Auto ........ (v) Felix.Neunkirchner 2025-10-02T12:32:02.083611Z [UPDATE] UF.501.003.000.213 wjDynAut - added SelectorVariable_3 and SelectorVariable_4........(v) Felix.Neunkirchner 2025-10-02T07:52:48.347133Z [UPDATE] UF.501.003.000.212 changed qr code to report service issue; machinenr automatically filled out in form........(v) Moritz.Wurian 2025-10-01T15:43:39.265418Z [UPDATE] UF.501.003.000.211 Merged SDO functions, KEBA Alarm Handling and CSV Load / Save from trunk (v) Sanghoon.Kim 2025-10-01T09:40:42.094470Z [BUGFIX] UF.501.003.000.210 Merged revision(s) 3263 from trunk: bugfix of clamp pressure sensor unit text on fixdata page (v) Amin.Adra 2025-10-01T07:09:00.291934Z [BUGFIX] UF.501.003.000.209 Debugging="false" (v) Sanghoon.Kim 2025-09-30T07:14:24.852081Z [BUGFIX] UF.501.003.000.208 Merged revision(s) 3254 from trunk: bugfix of visibility of lubrication footer button (v) Sanghoon.Kim 2025-09-25T15:12:54.210287Z [BUGFIX] UF.501.003.000.207b Merged revision(s) 3239 from trunk: wjAlarmHandling - additional info not shown sometimes (widget binding issue); changed column width of additional info column in alarm info table (v) Amin.Adra 2025-09-23T09:40:36.364076Z [BUGFIX] UF.501.003.000.206 Merged revision(s) 3211 from trunk: mould protection retrial counter 2 ........(v) Amin.Adra 2025-09-22T13:48:58.248696Z [BUGFIX] UF.501.003.000.205 Merged revision(s) 3207 from trunk: reset chain data in SS & mould protection Alarm ........(v) Amin.Adra 2025-09-22T11:54:22.844195Z [BUGFIX] UF.501.003.000.204 Merged revision(s) 3204 from trunk: mould protection retrial counter 1 (v) Sanghoon.Kim 2025-09-17T15:34:02.655867Z [BUGFIX] UF.501.003.000.203 Merged revision(s) 3170 from trunk: Wrong display of pressure inputs for DL machine (little different than trunk) ........(v) Sanghoon.Kim 2025-09-17T10:36:49.468460Z [REVERT] UF.501.003.000.202 revert of [BUGFIX] UF.501.003.000.200 Merged revision(s) 3170 from trunk: Wrong display of pressure inputs for DL machine ........(v) Sanghoon.Kim 2025-09-17T10:13:19.506862Z [ADD] UF.501.003.000.201 Merged revision(s) 3171 from trunk: Add define page number for ACT_PAGE ........(v) Sanghoon.Kim 2025-09-17T10:11:18.870342Z [BUGFIX] UF.501.003.000.200 Merged revision(s) 3170 from trunk: Wrong display of pressure inputs for DL machine ........(v) Moritz.Wurian 2025-09-16T05:24:41.583723Z [UPDATE] UF.501.003.000.199 visu bug for pressure on hybrid maschine (v) Moritz.Wurian 2025-09-16T04:31:26.382500Z [UPDATE] UF.501.003.000.198 bufix for KEB drives (v) Sanghoon.Kim 2025-09-12T12:12:28.556382Z [UPDATE] UF.501.003.000.197 Merged revision(s) 3143,3146,3147 from trunk: Hide Tab with Option and Machine type........(v) Sanghoon.Kim 2025-09-12T12:09:34.788795Z [BUGFIX] UF.501.003.000.196 Merged revision(s) 3154 from trunk: add missing reset of robot cycle start command........ Sanghoon.Kim 2025-09-12T12:08:27.552037Z [UPDATE] UF.501.003.000.195 Merged revision(s) 3153 from trunk: [UPDATE] SS - Ejector Fwd/Bwd Oscilating min/max limits Amin.Adra 2025-09-12T08:51:18.139306Z [BUGFIX] [UPDATE] UF.501.003.000.194 Merged revision(s) 3145 from trunk: minmax stroke ejector ........ Moritz.Wurian 2025-09-10T01:54:54.095003Z [UPDATE] UF.501.003.000.193 improve TSCon pressure control during injection Sanghoon.Kim 2025-09-08T16:06:13.017509Z [UPDATE] UF.501.003.000.192 Merged revision(s) 3133 from trunk: improve the pressure setting for decompression Sanghoon.Kim 2025-09-08T14:55:03.687843Z [UPDATE] UF.501.003.000.191 Merged revision(s) 3117,3118,3124,3125,3126,3127,3131 from trunk: [UPDATE] update of moldheight and carriage output handling [UPDATE] increase to 3 decimal points for T1 parameters on TScon [UPDATE] display TargetVelocity and MaxTorque Output [UPDATE] update for display of actual torque [UPDATE] small update of rated torque unit, max speed [UPDATE] display rated motor torque [UPDATE] small update for calibration page Sanghoon.Kim 2025-08-29T09:48:41.268692Z [UPDATE] UF.501.003.000.190 Merged revision(s) 2547,2545 ,2549,3040 from trunk: [BUGFIX] UF.501.001.000.155 bugfix of injection velocity closed loop for TH [UPDATE] UF.501.001.000.151 Improvement of rotary table [UPDATE] UF.501.001.000.153 add monitoring step variable for the smart sequencer [UPDATE] delete unused codes [UPDATE] 'Comment Sanghoon.Kim 2025-08-29T09:34:35.082990Z [UPDATE] UF.501.003.000.189 Merged revision(s) 3006 from trunk: Update Software changed to DevLink (by Patrik) ........ Sanghoon.Kim 2025-08-29T08:55:56.256967Z [UPDATE] UF.501.003.000.188 Merged revision(s) 3091,3104,3107 from trunk: Change the cooling time to DINT ........ Sanghoon.Kim 2025-08-29T07:58:50.135077Z [UPDATE] UF.501.003.000.187 Update of display encoder position Amin.Adra 2025-08-29T07:57:49.432548Z [UPDATE] UF.501.003.000.187 Merged revision(s) 3019, 3020, 3022, 3023, 3029, 3030, 3031, 3032, 3034, 3071, 3072, 3092, 3093, 3095, 3102 from trunk: ........ improve smart sequencer operation time Sanghoon.Kim 2025-08-27T16:18:43.296463Z [UPDATE] UF.501.003.000.186 Merged revision(s) 3009, 3096 from trunk: Separation of the TEA5 fixdata pages Sanghoon.Kim 2025-08-27T15:47:04.455197Z [BUGFIX] UF.501.003.000.185 Merged revision(s) 3098 from trunk: Bugfix for actual speed calculation ........ Sanghoon.Kim 2025-08-27T15:42:03.972510Z [UPDATE] UF.501.003.000.184Merged revision(s) 3097 from trunk: correct toggle position on visu, display encoder position ........ Sanghoon.Kim 2025-08-26T07:00:18.571352Z [REVERT] UF.501.003.000.184 revert of UF.501.003.000.171 bugfix of wrong MaxTorquePercent Sanghoon.Kim 2025-08-22T12:03:55.877034Z [REVERT] UF.501.003.000.183 revert UF.501.003.000.182 due to many compile error Sanghoon.Kim 2025-08-22T11:41:39.801357Z [UPDATE] UF.501.003.000.182 Merged revision(s) 3009 from trunk: Separation of the TEA5 fixdata pages ........ Sanghoon.Kim 2025-08-22T10:44:23.521679Z [UPDATE] UF.501.003.000.181Merged revision(s) 3049 from trunk: SuperFoam CPM, GasValve Option fixed ........ Sanghoon.Kim 2025-08-22T10:41:03.115687Z [BUGFIX] UF.501.003.000.180 Merged revision(s) 3064 from trunk: bugfix of SQC data ........ Sanghoon.Kim 2025-08-22T10:37:26.429517Z [BUGFIX] UF.501.003.000.179 Merged revision(s) 3062 from trunk: [BUGFIX] bugfix of SQC data take previous data ........ Amin.Adra 2025-08-21T07:39:27.707368Z [BUGFIX] UF.501.003.000.178 Merged revision(s) 3068 from trunk: mould protection retrial counter ........ Patrik.Tasch 2025-08-21T05:56:05.335943Z [BUGFIX].UF.501.001.000.177 Swifeling for Screw change (V) Patrik.Tasch 2025-08-20T07:17:24.566534Z [UPDATE].UF.501.003.000.176 wrong Position text for Carriage Unit (V) Patrik.Tasch 2025-08-19T09:30:09.841014Z [BUGFIX].UF.501.003.000.175 SW Update (V) Sanghoon.Kim 2025-08-08T04:19:53.418207Z [UPDATE] UF.501.003.000.174 Sometimes Plasticizing time was 0 due to the forced decompression TaeryeongPark 2025-08-07T11:10:19.734159Z [BUGFIX] UF.501.003.000.173 Sometimes plasticizing time do not count Sanghoon.Kim 2025-08-06T07:43:46.402544Z [REVERT] UF.501.003.000.172 Revert revision 3036 improve smart sequencer operation time (Need more test to release) Sanghoon.Kim 2025-08-06T06:31:54.458197Z [BUGFIX] UF.501.003.000.171 bugfix of wrong MaxTorquePercent Sanghoon.Kim 2025-08-05T10:24:21.421080Z [UPDATE] UF.501.003.000.170 add monitoring variable for smart sequence axis step Sanghoon.Kim 2025-08-04T09:08:17.785729Z [UPDATE] UF.501.003.000.169 increase limitation of ejector acceleration limit for dynamic movement Sanghoon.Kim 2025-08-04T09:06:56.849696Z [UPDATE] UF.501.003.000.168 add SQC data handshake with smart sequencer (to ensure collecting right SQC data) Sanghoon.Kim 2025-08-04T01:00:47.194828Z [UPDATE]UF.501.003.000.167 Add missing binding reference Sanghoon.Kim 2025-08-04T00:58:28.317553Z [UPDATE]UF.501.003.000.166 DRVFIX save for multiax drives was not working properly ........Merged revision(s) 3025 from trunk: Patrik.Tasch 2025-07-30T12:54:11.460787Z [UPDATE]UF.501.003.000.165 add Option 03A400 - Vacuum Pump (V) Amin.Adra 2025-07-30T10:50:51.874007Z [Update] UF.501.003.000.164 Merged revision(s) 3019, 3020, 3022, 3023, 3029, 3030, 3031, 3032, 3034 from trunk: ........ improve smart sequencer operation time Patrik.Tasch 2025-07-30T06:14:38.766170Z [BUGFIX]UF.501.003.000.163 Decomp Endposition after Purge (v) Patrik.Tasch 2025-07-24T06:09:34.314015Z [UPDATE]UF.501.003.000.162 Start Semi Auto by closing Safety Door (v) Patrik.Tasch 2025-07-24T04:01:22.829940Z [UPDATE]UF.503.003.000.161 Ejector Keep forwarded in Semi Auto mode (V) Patrik.Tasch 2025-07-24T04:00:27.723050Z [UPDATE]UF.503.003.000.160 Energy Monitoring for KEBA Drives (v) Amin.Adra 2025-07-23T11:19:00.794558Z [BUGIFX]UF.501.003.000.159 Merged revision(s) 3021 from trunk: cycle times for task classes for FLEX_CONFIG ........ Patrik.Tasch 2025-07-22T09:12:25.504652Z [BUGIFX]UF.501.003.000.158 Calibration for Carriage Unit (v) philipp.seyser 2025-07-22T01:28:29.769767Z [ADD] added max percent torque to fix page clamp close Amin.Adra 2025-07-21T13:51:08.668549Z [BUGIFX]UF.501.003.000.156 ejector delay timer Amin.Adra 2025-07-21T10:40:35.025588Z [BUGIFX]UF.501.003.000.155 ax-sim ej & tog Patrik.Tasch 2025-07-21T08:42:05.519345Z [BUGIFX]UF.501.003.000.154 Heating Sensor Type Init (V) Amin.Adra 2025-07-21T05:46:01.898818Z [BUGFIX] UF.501.003.000.153 revert the file Cpu.sw. It was commit with r3008 Patrik.Tasch 2025-07-18T07:51:51.523418Z [UPDATE]UF.501.003.000.152 Merged revision(s) 3005 from trunk: [ADD] Sensor Type change for ATA492 Module; Bugfix Barrel Sensor Type; Reference Config for ATA492 Module ........(V) Sanghoon.Kim 2025-07-18T07:03:39.934112Z [UPDATE] UF.501.003.000.151 Update from the customer visit - profile graph display until end deceleration - the ejector mode, ejector while gate opened, allow to use key switch - ejector movement with manual key switch allow only mold opened position - bugfix of default purge sequencer Richard.Wagner 2025-07-17T05:43:59.514799Z [BUGFIX] UF.501.003.000.150 Ejector remains in State Operation Enable when door is opened ........ Merged revision(s) 3003 from trunk Sanghoon.Kim 2025-07-17T02:05:27.941493Z [UPDATE] UF.501.003.000.149 Merged revision(s) 2958 from trunk: [UPDATE] O4A204, O2A900 Option fixed ........ Sanghoon.Kim 2025-07-16T13:32:33.901832Z [UPDATE] UF.501.003.000.148 Merged revision(s) 2957 from trunk: [UPDATE] Do not count up for injection timer for CtrStep == F_STEP_HOLDON_PRESSURE_PRS_RELEASE ........ Moritz.Wurian 2025-07-16T11:35:31.780589Z [UPDATE] UF.501.003.000.147 Merged EJ while SG open from trunk Amin.Adra 2025-07-16T09:35:52.618438Z [BUGFIX] UF.501.003.000.146 Reset the Mould Protection Signal With RestAllAlarem Amin.Adra 2025-07-16T08:52:42.907118Z [BUGFIX] UF.501.003.000.145 revert the file Cpu.sw. It was commit with r2987 Amin.Adra 2025-07-16T08:49:09.110640Z [BUGFIX] UF.501.003.000.144 Merged revision(s) 2961 from trunk: Add ejector oscillation enable checkbox on ejector page ........ Amin.Adra 2025-07-16T08:33:07.146978Z [BUGFIX] UF.501.003.000.143 Merged revision(s) 2984 from trunk: Semi auto mode, copy REC_DATA between cycles ........ Sanghoon.Kim 2025-07-16T06:49:54.175162Z [UPDATE] UF.501.003.000.142 bugfix of actual force on profile graph Sanghoon.Kim 2025-07-16T05:31:20.077807Z [UPDATE] UF.501.003.000.141 update of finalCreep mode parameter, default kd parameter for PID position Sanghoon.Kim 2025-07-16T05:28:00.423324Z [UPDATE] UF.501.003.000.140 Bugfix of actual speed on profile graph Sanghoon.Kim 2025-07-16T03:01:39.417684Z [UPDATE] UF.501.003.000.139 Merged revision(s) 2881,2882 from trunk: [UPDATE] add Intermediate Stop to Core SS Popup; delete unused Values [UPDATE] wjDynAutModal layout change ........ Sanghoon.Kim 2025-07-16T01:55:57.095551Z [UPDATE] UF.501.003.000.138 Improve the positioning with finalCreep Patrik.Tasch 2025-07-15T12:21:25.980594Z [BUGFIX]UF.501.003.000.137 Axis Trace negative Speed Injection (V) Amin.Adra 2025-07-15T08:42:21.041422Z [UPDATE] UF.501.003.000.136 Merged revision(s) 2970 from trunk: [Update] Smart sequencer dropdown in fixdata optional ( Disable, Basic, Advanced) ........ Sanghoon.Kim 2025-07-15T08:30:11.498895Z [BUGFIX] UF.501.003.000.135 bugfix of grease level sensor type Part2 Amin.Adra 2025-07-15T06:43:44.923377Z [UPDATE] UF.501.003.000.134 Merged revision(s) 2965, 2966 from trunk: [UPDATE] Update SS for Automatic MH Compensation function Sanghoon.Kim 2025-07-15T04:45:48.432549Z [UPDATE] UF.501.003.000.133 update for Automatic MH Compensation function Sanghoon.Kim 2025-07-15T00:54:59.515093Z [BUGFIX] UF.501.003.000.132 bugfix of grease level sensor type Sanghoon.Kim 2025-07-14T08:24:22.271282Z [UPDATE] UF.501.003.000.131 improve end ramping after holdon (take PGen deceleration instead PID) Sanghoon.Kim 2025-07-14T08:22:10.058461Z [UPDATE] UF.501.003.000.130 PGen[idx].Out.SetVelocity to SetVelocity_RPM / remove PID position control for injection (do not need) Amin.Adra 2025-07-14T07:33:42.992484Z [BUGFIX] UF.501.003.000.129 Merged revision(s) 2950 from trunk: [UPDATE] Optimize the Axis Step Times ( time wich display on the step in the SS) ........ Amin.Adra 2025-07-14T07:32:08.958928Z [BUGFIX] UF.501.003.000.128 Merged revision(s) 2949 from trunk: [UPDATE] Wait Axis strock for simple mode SS ........ Amin.Adra 2025-07-14T05:30:04.308198Z [Update]UF.501.003.000.127 Merged revision(s) 2945 from trunk: Use SetVelocity_RPM Amin.Adra 2025-07-14T04:09:18.318573Z [BUGFIX]UF.501.003.000.126 Counter Mould Open Patrik.Tasch 2025-07-11T09:40:55.341716Z [UPDATE]UF501.003.125 Change VelMode to ext. vel (v) Amin.Adra 2025-07-11T07:01:09.014044Z [Update]UF.501.003.000.124 update the internal limits of strock of Airblow with ejector Sanghoon.Kim 2025-07-11T06:55:38.913778Z [BUGFIX]UF.501.003.000.123 Bugfix of PGen braking Amin.Adra 2025-07-11T06:26:29.801203Z [BUGFIX]UF.501.003.000.122 update the internal limits of strock of Airblow with ejector Amin.Adra 2025-07-11T05:36:09.563964Z [BUGFIX]UF.501.003.000.121 remove the limits of strock of Airblow with ejector Patrik.Tasch 2025-07-11T05:32:23.286416Z [BUGFIX]UF.501.003.000.120 Software Update task (v) Sanghoon.Kim 2025-07-11T04:23:22.518022Z [UPDATE] UF.501.003.000.119 update for PGen braking calculation Amin.Adra 2025-07-11T04:21:44.462199Z [BUGFIX]UF.501.003.000.118 Min Value for Oscillation Forward Strock. Amin.Adra 2025-07-11T03:29:33.636639Z [UPDATE]UF.501.003.000.117 Oscillation delay: Delay before Oscillation start, MaxValue_AirBlows_Ejector Amin.Adra 2025-07-10T23:29:50.630519Z [BUGFIX]UF.501.003.000.116 Merged revision(s) 2931 from trunk: [UPDATE] Hold To Run Ejector with SS Simple Mode 1 if ejector mode is changed to "Sequencial", then enable the ejector chain again. Patrik.Tasch 2025-07-10T13:01:33.335005Z [UPDATE]UF.501.003.000.125 Max drive Load numeric Output size Amin.Adra 2025-07-10T11:56:37.064117Z Merged revision(s) 2927 from trunk: [UPDATE] Delay for Oscillating Ejector with SS Simple Mode [UPDATE] Hold To Run Ejector with SS Simple Mode ........ Sanghoon.Kim 2025-07-10T11:42:00.705458Z [BUGFIX]UF.501.003.000.113 bugfix on disableHoldon mode Sanghoon.Kim 2025-07-10T11:40:58.416265Z [UPDATE]UF.501.003.000.112 Add tolerance for airblow position Patrik.Tasch 2025-07-10T09:28:57.035951Z [UPDATE]UF.501.003.000.111 remove Intermediate Stop for Ejector on SS (v) Patrik.Tasch 2025-07-10T09:08:09.776135Z [BUGFIX] UF.501.003.000.110 Core Copy between SS and Settings Page (v) Felix.Neunkirchner 2025-07-10T07:53:54.143806Z Merged revision(s) 2919 from trunk: [BUGFIX] UF.501.003.000.109 receipe file name input restriction (no space & no dot allowed) ........ Amin.Adra 2025-07-10T06:15:07.003929Z [BUGFIX] UF.501.003.000.108 MP_time on Mould Overview Page Amin.Adra 2025-07-10T06:09:23.714905Z [UPDATE] UF.501.003.000.107 reformatting WJAUT_StepAxisStartEjector function to save 100 ms Amin.Adra 2025-07-10T04:32:43.482464Z [BUGFIX] UF.501.003.000.106 core defualt setting 2. Sanghoon.Kim 2025-07-10T01:50:37.409275Z [UPDATE] UF.501.003.000.105 Update of Auto Moldheight Amin.Adra 2025-07-10T01:04:24.926440Z [BUGFIX] UF.501.003.000.104 which steps are used in SS Amin.Adra 2025-07-10T00:50:58.692572Z [BUGFIX] UF.501.003.000.103 core defualt setting. Sanghoon.Kim 2025-07-09T15:30:51.615513Z [UPDATE] UF.501.003.000.102 update for pressure setting of purge Sanghoon.Kim 2025-07-09T15:01:33.095556Z [UPDATE] UF.501.003.000.101 update for injection task Sanghoon.Kim 2025-07-09T12:12:15.487137Z [UPDATE] UF.501.003.000.100 add missing reset of parameters on PID Sanghoon.Kim 2025-07-09T10:36:24.912282Z [UPDATE] UF.501.003.000.099 carriage backward behavior on manual mode Sanghoon.Kim 2025-07-09T10:35:00.481369Z [BUGFIX] UF.501.003.000.098 bugfix on pid controller, ProfGen Sanghoon.Kim 2025-07-09T10:33:24.167183Z [UPDATE] UF.501.003.000.098 add default fixdata settings Felix.Neunkirchner 2025-07-09T10:18:55.404559Z Merged revision(s) 2891 from trunk: [UPDATE] UF.501.003.000.097 SS - maxPressure binding fixed ........ Amin.Adra 2025-07-09T08:16:43.107317Z [UPDATE] UF.501.003.000.096 if core disabled -> no setting configalarm. Amin.Adra 2025-07-09T04:37:42.356144Z [UPDATE] UF.501.003.000.095 core defualt setting. Felix.Neunkirchner 2025-07-08T12:37:13.496301Z [BUGFIX] UF.501.003.000.094 wjProfileGraph toolip wrong value issue fixed ........ Patrik.Tasch 2025-07-08T08:53:09.162488Z [UPDATE]UF.501.003.000.093 Heating Init (v) Patrik.Tasch 2025-07-08T08:49:32.532285Z [UPDATE]UF.501.003.000.092 Heating Init (v) Amin.Adra 2025-07-08T08:39:32.989974Z [UPDATE ]UF.501.003.000.091 Alarm Mould Protection Sanghoon.Kim 2025-07-08T07:06:40.523458Z [UPDATE] UF.501.003.000.090 recalculation of permanent memory Sanghoon.Kim 2025-07-08T06:58:23.466897Z [UPDATE] UF.501.003.000.089 Missing part of merge, update of permanent memory, wjGear Amin.Adra 2025-07-08T06:56:24.358528Z [UPDATE ]UF.501.003.000.088 Merged revision(s) 2753 from trunk: [UPDATE] SuperFoam; CPM ........ Sanghoon.Kim 2025-07-08T06:29:59.552117Z [UPDATE] UF.501.003.000.087 Merged revision(s) 2818,2831,2832,2835,2836,2837,2840,2841,2843,2845,2856,2864 from trunk: [ADD] add improved lubrication greasing [UPDATE]fix value for speed rate limiter [UPDATE] test to remove dnUpDownHoldon (MergedTag3)[UPDATE] General data copying concept; AUT_DATA to wjAut_Par is copied only at the end of the cycle. Dailytimes is included. [UPDATE] change touch confirm time for mh to 1 second [UPDATE] avoid speed rate limiter = 0 [UPDATE] Core Intermediate Stop (Visu Change missing) [UPDATE] Update for Lubrication (Sensor type for toggle lubrication) [UPDATE] Update for Lubrication (Sensor type for toggle lubrication) [UPDATE] Update for Lubrication (Sensor type for toggle lubrication) [UPDATE] Merged revision(s) 2851-2855 from branches/BrakingPID: Amin.Adra 2025-07-08T06:00:34.250808Z [UPDATE ]UF.501.003.000.086 Merged revision(s) 2792, 2793 from trunk: [UPDATE] format changes init_PGen ........ Amin.Adra 2025-07-08T05:24:48.527249Z [UPDATE ]UF.501.003.000.085 revert r2866 UF.501.003.000.084 Amin.Adra 2025-07-08T05:12:09.162730Z [UPDATE ]UF.501.003.000.084 Merged revision(s) 2803 from trunk: [UPDATE] Mold Protection Torque increased [UPDATE] Clamp Axis end condition ........ Amin.Adra 2025-07-08T04:43:22.216046Z [UPDATE ]UF.501.003.000.083 Merged revision(s) 2842,2839,2838,2835,2810,2807,2806,2804,2790,2788,2787,2786,2770,2769,2767,2765,2760,2673 from trunk: [UPDATE] delay times in corresponding pages: Injection/ Plastisizing [UPDATE] General data copying concept; Part 3 [UPDATE] General data copying concept; Part 2 [UPDATE] General data copying concept; AUT_DATA to wjAut_Par is copied only at the end of the cycle. Dailytimes is included. [UPDATE] copy delay times in pages :Injection/ Plasticizing/ Mould/ Ejector/ carriage [UPDATE] reps name for Ejector page. [UPDATE] delay times in corresponding pages: Mould/ Ejector/ carriage [UPDATE] reps for Ejector page. [UPDATE] AX_STAT_NEG_STP_POSITION Eject Chain manual operation [UPDATE] Oscillating Strock > than Strock Ejector Forward [UPDATE] Eject Chain manual operation with oscilating && init_PGen for ejector [UPDATE] Eject Chain manual operation && std seq [UPDATE] Air Blow should work also with Oscillating [UPDATE] Oscillation Ejector; Advanced and Simple Mode SS [BUGFIX] Air Blow for Ejector retract [UPDATE] Delay Ejector; Simple Mode SS [UPDATE] Oscillation Ejector; Simple Mode SS [UPDATE] Delay Times always calculated; Simple/ Advanced Mode SS revision(s)from branches/UF.510.003_TOP_ISP_SS Patrik.Tasch 2025-07-07T12:02:21.815451Z [BUGFIX]UF.501.003.000.083 Software Update task (v) Patrik.Tasch 2025-07-04T09:13:47.504447Z [UPDATE]UF.501.003.000.082 Alarm Statistic Page size (v) TaeryeongPark 2025-07-03T02:34:17.700768Z [BUGFIX]UF.501.003.000.081 DosageUnit Output Signal Sanghoon.Kim 2025-07-02T15:50:53.545611Z [UPDATE] UF.501.003.000.080 recalculation of permanent memory Sanghoon.Kim 2025-07-02T15:21:55.455065Z [UPDATE] UF.501.003.000.079 Merged revision(s) 2811 from trunk: [UPDATE] reset Iterm of backpressure, when act pres over set pressure [UPDATE] reduce max difference for speed rate limiter ........ Sanghoon.Kim 2025-07-02T15:18:18.237716Z [UPDATE] UF.501.003.000.078 Merged revision(s) 2789,2801 from trunk: [UPDATE] use MA_FIX MaxTorque setting for Clamp and Ejector [UPDATE] simple Mold Protection for every Step [UPDATE] Hide Pressure settings for Clamp open and Ejector fw/bw/osc [UPDATE] Clamp Movement changed to use maxtorquepercent instead of tscon [UPDATE] read/write DRVFIX csv changes ........ Sanghoon.Kim 2025-07-02T15:06:44.326869Z [UPDATE] UF.501.003.000.077 Merged revision(s) 2762 from trunk: [UPDATE] Advanced Mold Protection ........ Sanghoon.Kim 2025-07-02T15:04:27.011090Z [UPDATE] UF.501.003.000.076 Merged revision(s) 2757,2759,2761 from trunk: [UPDATE] Calibration to set position, Purge pressure, remove DRVFIX error with missing device link [UPDATE] Mold Height IO changed to 3 [UPDATE] remove ap_scale input *10 for electric clamp ........ Sanghoon.Kim 2025-07-02T14:58:40.522258Z [UPDATE] UF.501.003.000.075 Merged revision(s) 2731 from trunk: [UPDATE] clamp calibration to -1mm wrong minus sign ........ Sanghoon.Kim 2025-07-02T14:57:12.557680Z [UPDATE] UF.501.003.000.074 Merged revision(s) 2730 from trunk: [UPDATE] hide unused indexes for mold lookup table Patrik.Tasch 2025-07-02T08:56:33.655283Z [UPDATE]UF.501.003.000.073 Purge (v) Patrik.Tasch 2025-06-30T12:24:19.149872Z [BUGFIX]UF.501.003.000.072 Injection disabled symbol (v) Moritz.Wurian 2025-06-26T00:53:38.887779Z [BUGFIX] UF.501.003.000.071 change library call to LCScDINT for ap_scale Sanghoon.Kim 2025-06-25T11:38:44.979980Z [BUGFIX]UF.501.003.000.070 Missing part on UF.501.003.000.068 Clamp Force Sensor Unit on Fix Page Moritz.Wurian 2025-06-25T09:59:58.704887Z [BUGFIX]UF.501.003.000.069 Automatic Mold Height backwards fixed Patrik.Tasch 2025-06-25T09:57:28.906699Z [BUGFIX]UF.501.003.000.068 Clamp Force Sensor Unit on Fix Page (v) Patrik.Tasch 2025-06-25T08:59:00.267653Z [UPDATE]UF.510.003.000.067 Merged revision(s) 2736 from tags/UF.510.001: [UPDATE]UF.510.001.000.163 SuperFoam; CPM (v) Sanghoon.Kim 2025-06-24T18:02:26.007873Z [UPDATE] UF.510.003.000.066 update of Permanent memory Sanghoon.Kim 2025-06-24T17:42:36.408918Z [UPDATE] UF.510.003.000.065 Merged revision(s) 2722 from trunk: [UPDATE] Plasticizing stop movement adjusted, added Torque Difference to Checkpos lib ........ Sanghoon.Kim 2025-06-24T17:41:02.025716Z [UPDATE] UF.510.003.000.064 Merged revision(s) 2718,2721 from trunk: [UPDATE] add SDO Parameter velocity filter time for keba drives [UPDATE] add ram to rom save for keba sdo functions Sanghoon.Kim 2025-06-24T17:38:32.801268Z [BUGFIX]UF.510.003.000.063 Merged revision(s) 2708,2709,2710,2717 from trunk: [UPDATE] Encoder offset function updated, including mappview content and binding [UPDATE] updated alarmtexts, localizabletexts [BUGFIX] alarm deleted [UPDATE] Adjust Encoder offset function [UPDATE] Clamp close condition changed back to 0.1mm Moritz.Wurian 2025-06-24T09:38:09.984882Z [BUGFIX]UF.510.003.000.062 Merged revision(s) 2693 from trunk: [BUGFIX] Clamp force Sensor in KN ........ Amin.Adra 2025-06-23T13:50:00.918168Z [BUGFIX]UF.510.003.000.061 loop in PurgeOut chain Amin.Adra 2025-06-23T12:59:16.065665Z [BUGFIX]UF.501.003.000.060 revert UF.501.003.000.058 Purge Sanghoon.Kim 2025-06-13T12:25:00.871133Z [UPDATE]UF.501.003.000.059 Merged revision(s) 2694,2697,2698,2702 from trunk: [UPDATE] Clamp negative end position was not reached [UPDATE] update for Clamp End deceleration handling for software installation [UPDATE] PGen target position 0 for mold close [UPDATE] update for simulation Patrik.Tasch 2025-06-12T11:53:32.024186Z [BUGFIX]UF.501.003.000.058 Purge (v) Patrik.Tasch 2025-06-12T06:29:07.455809Z [BUGFIX]UF.501.003.000.057 Binding Compiling Error (v) SeongwonLee 2025-06-12T04:24:55.874737Z [BUGFIX]UF.501.003.000.056 mold-close complete flag issue Patrik.Tasch 2025-06-11T13:11:24.358504Z [UPDATE]UF.501.003.000.055 hide Hydraulic spezific group boxes when TE is active (v) Patrik.Tasch 2025-06-11T09:17:23.466708Z [BUGFIX]UF.501.003.000.054 Cooling Time on Start Page (v) Sanghoon.Kim 2025-06-07T03:16:07.712197Z [UPDATE] UF.501.003.000.053 Merged revision(s) 2643, 2644 from trunk: [UPDATE] Add torque limitation on standstill Sanghoon.Kim 2025-06-06T11:24:56.033449Z [UPDATE] UF.501.003.000.052 reprogram the automatic mold height process ........Merged revision(s) 2688 from trunk: Sanghoon.Kim 2025-06-06T09:59:22.797066Z [UPDATE]UF.501.003.000.051 Merged revision(s) 2652,2653,2654,2662,2663,2664,2674,2675,2676,2677,2686 from trunk: [UPDATE] Improve position control on braking(TE) Part1 [Update] Braking Ramps, PID breaking [UPDATE] Improve position control on braking(TE) Part2 [UPDATE] update for task manager [BUGFIX] bugfix on PID on PGen [BUGFIX] bugfix of clamp closed condition [UPDATE] update for clamp end condition, ejector end condition [UPDATE] stop all axis if automatic moldheight stopped (sometimes it was still active) [UPDATE] additional injection position with 0.01mm unit for better quality data, extended time to measure cushion position [UPDATE] Update for the PGen End Braking [UPDATE] Setting mode force, Moldheight process force, Clamp closed condition Patrik.Tasch 2025-06-05T13:39:39.826037Z [UPDATE]UF.501.003.000.050 remove Robot Tab from Startpage (v) Patrik.Tasch 2025-06-05T13:23:31.613481Z [UPDATE]UF.501.003.000.049 Block Auto MH start during MH movement in normal mode (v) Amin.Adra 2025-06-05T07:22:23.153060Z [BUGFIX] UF.501.003.000.048 delay 1 min after start up then call wjAut lib Amin.Adra 2025-06-04T12:54:29.132527Z [BUGFIX] UF.501.003.000.047 delay 3 min after start up then call wjAut lib Amin.Adra 2025-06-04T12:23:59.250802Z [BUGFIX] UF.501.003.000.046 delay 3 min after start up then call wjAut lib TaeHwanRow 2025-06-04T08:22:27.080767Z [UPDATE] UF.501.003.000.045 Corrected B-side injection operation abnormality. Change PGen -> pPGen LeeDongHo 2025-06-04T05:08:51.687954Z [UPDATE] UF.501.003.000.044 Add DLA5_2K CP1686X_Hybrid1 config Sanghoon.Kim 2025-06-03T07:53:15.950844Z [UPDATE] UF.501.003.000.043 Merged revision(s) 2640,2641 from trunk: [UPDATE] update holdon switchover priority [UPDATE] improve airblow EDGEPOS function Amin.Adra 2025-05-30T10:27:29.194270Z [BUGFIX] UF.501.003.000.042 Service Mode when load fix&rec data and delete or load sequence Sanghoon.Kim 2025-05-30T07:40:02.982916Z [UPDATE] UF.501.003.000.041 Merged revision(s) 2385 from trunk: [UPDATE] Improve User Interface; Cascade Valve Gate Control ticket nr. 1882293795 ........ Sanghoon.Kim 2025-05-30T07:32:29.604604Z [UPDATE] UF.501.003.000.040 Merged revision(s) 2446 from trunk: [UPDATE] improve user interface ticket no.1882293795 ........ Sanghoon.Kim 2025-05-30T06:21:26.782001Z [UPDATE] UF.501.003.000.039 change of permanent memory setting Sanghoon.Kim 2025-05-30T05:07:50.534222Z [UPDATE] UF.501.003.000.038 Merged revision(s) 2622 from trunk: [UPDATE] update auto mold height increase adjust, decrease adjust and touch not checked modify ........ Sanghoon.Kim 2025-05-30T05:03:45.053197Z [UPDATE] UF.501.003.000.037 Merged revision(s) 2619,2620,2621 from trunk: [UPDATE] update holdon pressure max Mpa value [UPDATE] change the holdon speed to mm/s from percent, change holdon speed limit [UPDATE] Injection allow to move below 0 for calibration mode, Change MTLookUpTable mode to display out of range (below 0) Sanghoon.Kim 2025-05-30T04:50:26.453185Z [UPDATE] UF.501.003.000.036 Merged revision(s) 2606,2607,2610,2614,2619 from trunk: [UPDATE] hide moldheight encoder assign button for user (visible only for service) [UPDATE] hide carriage contents which are not used for smart seq. [UPDATE] Update on Ejector page [UPDATE] update of injection speed display to positive value [UPDATE] update holdon pressure max Mpa value Sanghoon.Kim 2025-05-30T04:43:14.696569Z [UPDATE] UF.501.003.000.035 Merged revision(s) 2598,2599,2600,2601,2602,2603,2604,2605 from trunk: [UPDATE] make clear code for the PID position controller [UPDATE] make clear code for the PID position controller #2 [UPDATE] make clear code for the PID position controller #2 [UPDATE] exclude the holdon release step for the holdon timer count [UPDATE] fixed injection PID position control [UPDATE] update for injection ACT_DATA [UPDATE] disable holdon step if the holdon time is 0 [UPDATE] fixed injection PID position control nSet changed, add decomp after Sanghoon.Kim 2025-05-30T04:32:42.992312Z [UPDATE] UF.501.003.000.034 Merged revision(s) 2592,2593,2594,2596 from trunk: [ADD] Add Position PID parameters for Injection (only fixdata) [UPDATE] update for carriage without potentiometer [UPDATE] Add PID position IP, NS [BUGFIX] Lubrication footer button LED not workingMerged revision(s) from trunk: Sanghoon.Kim 2025-05-30T04:24:58.032160Z [UPDATE] UF.501.003.000.033 Merged revision(s) 2564,2566,2565,2567,2568,2569,2570,2576,2577,2579,2590,2591 from trunk: [UPDATE] Pre-deceleration to switchover position [UPDATE] Pre-deceleration to switchover only holdon speed is lower than injection speed [UPDATE] Change to REAL value inputs for wjProfileGraph [UPDATE] add new features on wjPIDcon (Feedforward, Threshold, RampLimiter) [UPDATE] update holdon controller with new wjPIDcon (need to test on machine) [UPDATE] update for wjPIDcon [UPDATE] Extend PGen until holdon pressure step (Injection) [UPDATE] update for holdon release pressure [UPDATE] Update for back pressure controller for newer wjPIDcon (Threshold). clean unused codes. [UPDATE] update for limitation of PID holdon (PGen limit the PID output also for all the switchover mode) [UPDATE] option to stop at switchover position (TE) [UPDATE] update for holdon PGen Sanghoon.Kim 2025-05-30T03:14:05.429065Z [UPDATE] UF.501.003.000.032 Merged revision(s) 2562,2563 from trunk: [UPDATE] Improve of Disabled holdon phase [UPDATE] update of holdon pressure release (nSet goes not 0) ........ Sanghoon.Kim 2025-05-30T03:09:22.556519Z [BUGFIX]UF.501.003.000.031 Merged revision(s) 2522 from trunk:[UPDATE] added robot visu page ........ Sanghoon.Kim 2025-05-30T03:04:31.305898Z [BUGFIX]UF.501.003.000.030 Merged revision(s) 2497,2376,2389,2430,2470 from branches/UF.510.003_SyncInjection:(by Moritz) [UPDATE] Refactored SDO functions and implemented CSV-based read/write support for drive parameters [UPDATE] deleted some unused drive structures [UPDATE] Bugfixes in acyclic SDO read Problems [ADD] timeout for Drive_SDO functions [UPDATE] Datashare Master Slave PID test [UPDATE] add dr99 to keb parameter load Patrik.Tasch 2025-05-28T13:59:41.241400Z [BUGFIX]UF.501.003.000.029 Core dependency to Ejector(v) Patrik.Tasch 2025-05-28T10:34:10.465766Z [BUGFIX]UF.501.003.000.028 Core dependency to Ejector (v) Amin.Adra 2025-05-22T07:34:40.879700Z [BUGFIX] UF.501.003.000.027 Ejector timeout Sanghoon.Kim 2025-05-16T12:19:29.163615Z [UPDATE] UF.501.003.000.026 added intrusion ........Merged revision(s) 2531 from trunk: (by Moritz) Sanghoon.Kim 2025-05-16T12:12:33.577355Z [BUGFIX] UF.501.003.000.025 Fix Noise during holdon release, plast done and back pressure ........Merged revision(s) 2523 from trunk: (by Seongwon Lee) Sanghoon.Kim 2025-05-16T12:06:24.267980Z [Update] UF.501.003.000.024 General update for TE (SVN.2495,2496) Sanghoon.Kim 2025-05-16T11:46:06.473346Z [Update] UF.501.003.000.023 Update for stable injection controller (SVN.2520,2515,2514,2513,2512,2499,2494,2493,2489,2466,2465,2463,2462,2461,2460,2459) Sanghoon.Kim 2025-05-16T10:32:59.174794Z [Update] UF.501.003.000.022 Hide ejector Reps ........Merged revision(s) 2536 from trunk: Sanghoon.Kim 2025-05-16T10:23:19.963618Z [ADD] UF.501.003.000.021 Circulation motor Overload Alarm ........Merged revision(s) 2431 from trunk: Sanghoon.Kim 2025-05-16T10:19:13.490428Z [BUGFIX] UF.501.003.000.020 wrong Unit on Clamp Fix Page ........Merged revision(s) 2415 from trunk: Amin.Adra 2025-05-13T12:27:51.025883Z [BUGFIX] UF.501.003.000.019 Merged revision(s) 2533, 2537 from trunk: [Update] No Ejector for Bad parts ........ Amin.Adra 2025-05-13T12:21:45.058706Z [BUGFIX] UF.501.003.000.018 Merged revision(s) 2538 from trunk: [BUGFIX] counter parts ........ Sanghoon.Kim 2025-05-05T08:12:27.804947Z [UPDATE] UF.501.003.000.017 update page text for drive parameter ........Merged revision(s) 2444 from branches/UF.510.003_InjectionTest: Sanghoon.Kim 2025-05-05T08:09:42.828181Z [UPDATE] UF.501.003.000.016 update to avoid controller error on injection ........Merged revision(s) 2473 from branches/UF.510.003_InjectionTest: Sanghoon.Kim 2025-05-05T08:08:33.625176Z [ADD] UF.501.003.000.015 add input for number of lookup table for toggle ........Merged revision(s) 2475 from branches/UF.510.003_InjectionTest: Sanghoon.Kim 2025-05-05T08:07:21.609415Z [UPDATE] UF.501.003.000.014 add target position on mold close during setting mode ........Merged revision(s) 2474 from branches/UF.510.003_InjectionTest: Mario.Sarajlic 2025-04-30T07:41:16.885515Z [ADD]UF501.003.000.013 Footer mode select change to inline instead of dropdown Sanghoon.Kim 2025-04-28T13:32:42.163065Z [BUGFIX]UF501.003.000.012 increase dnUp,dnDown for injection ........Merged revision(s) 2452 from trunk: Sanghoon.Kim 2025-04-28T13:31:52.318658Z [BUGFIX]UF501.003.000.011 add missing stop deceleration for opening mold Merged revision(s) 2451 from trunk: Patrik.Tasch 2025-04-24T08:03:27.537759Z [BUGFIX]UF501.003.000.010 Core 7-10 (v) TaeHwanRow 2025-04-07T10:04:52.568598Z [BUGFIX]UF.501.003.000.009 Improve switchover during injection Patrik.Tasch 2025-04-04T09:28:50.465116Z [BUGFIX]UF501.003.000.008 refresh DevLink by entering Recipe Page (v) Patrik.Tasch 2025-04-04T09:25:07.168749Z [BUGFIX]UF501.003.000.007 Core interlock at Core disable in SS (v) Felix.Neunkirchner 2025-03-31T14:30:13.382381Z Merged revision(s) 2373 from tags/UF.510.001: [UPDATE] UF501.003.000.006 - datChange trigger on changing checkboxes inside SS ........ Patrik.Tasch 2025-03-26T06:58:26.326458Z [UPDATE]UF501.003.000.005 usability Smart Sequenzer Core Interlock (v) Patrik.Tasch 2025-03-26T06:57:00.229273Z [UPDATE]UF501.003.000.004 reduce unused PV's (v) Sanghoon.Kim 2025-03-21T12:24:31.901793Z [BUGFIX] UF510.003.000.003 bugfix for missing SNMP activation on ethernet Sanghoon.Kim 2025-03-17T13:15:09.335345Z [BUGFIX] UF510.003.000.002 bugfix for Lubrication footer button Sanghoon.Kim 2025-03-14T11:17:42.009387Z [BUGFIX] UF510.003.000.001 Merge missing part after the Rev.2271 Merged revision(s) 2275,2278,2293,2312,2313,2336,2337 from beta/UF.510.003-BETA: [UPDATE] Apply more pump pressure to improve nozzle touch pressure [UPDATE] UF510.001.131 - remove monday QR code [UPDATE] Purge [BUGFIX] Start Up scraps [UPDATE] Bugfix Safety Input Footer Sanghoon.Kim 2025-03-14T11:05:21.431483Z [ADD] UF.510.003.000.000 release tag version Sanghoon.Kim 2025-02-19T06:34:39.320275Z [BUGFIX] bugfix of Sampling time of PGen, add missing break on ej_econ. Patrik.Tasch 2025-02-18T14:45:00.014362Z [BUGFIX] refresh Quality Table in Dry Cycle Patrik.Tasch 2025-02-18T13:07:31.431457Z [BUGFIX] Axis trace Patrik.Tasch 2025-02-18T10:44:10.682780Z [BUGFIX] Auto Cycle stop by fix data change Sanghoon.Kim 2025-02-18T10:20:27.051689Z [BUGFIX] bugfix for injection target position for disabled holdon step, wrong last cycle time, wrong clamp open position in quality table, decompresion2 maximum. add missing of reset of ACT_DATA plasticizing. wrong maximum injection speed. Felix.Neunkirchner 2025-02-17T16:32:25.885701Z [UPDATE] spc navigation overview page -> detail page Felix.Neunkirchner 2025-02-17T15:43:42.461127Z [BUGFIX] wjDBTableChart - when actual data length is less than selected range (20/100/1000), the graph now properly scales to show only available data points Felix.Neunkirchner 2025-02-17T14:02:46.235267Z [BUGFIX] bugfix spc overview + trend grahic; merged missing logic/content/bindings to use 36 columns Albin.Kroell 2025-02-17T10:02:07.668653Z [UPDATE] Noise issue of injection Motors while stopping, Speedlimiter values now hardcoded and set diefferently for both directions Albin.Kroell 2025-02-17T06:36:29.724587Z [ADD] Drive project TE220 Albin.Kroell 2025-02-17T06:25:24.715945Z [ADD] Drive Project for TE170 KEBA Albin.Kroell 2025-02-16T07:37:38.678609Z [ADD] HW-Configs for Prototype-Machines Albin.Kroell 2025-02-16T07:34:44.854465Z [ADD] Drive Project Files Added Sanghoon.Kim 2025-02-14T13:50:29.599432Z [UPDATE] revert of SVN.2248. The injection speed is positive value and Max value also. It will displayed positive value on injection page and quality table also. Amin.Adra 2025-02-14T10:44:47.076001Z [ADD] Purge for TEA5 (Part5)if purge chain is empty, automatically load default purge chain. Felix.Neunkirchner 2025-02-14T09:19:40.506199Z Merged revision(s) 2250 from tags/UF.510.001: [UPDATE] UF510.001.107 wjDBViewer - increased text size on spc table (content) ........ Albin.Kroell 2025-02-14T05:35:28.251937Z [BUGFIX] Mould Open Count in SmartSequencer fixed Albin.Kroell 2025-02-14T01:56:16.568518Z [BUGFIX] negated values for Inj-Speed on Electric Injections, Bug in KeyHold for Plasticizing B Felix.Neunkirchner 2025-02-12T15:38:09.591808Z Merged revision(s) 2246 from trunk: Merged revision(s) 2245 from tags/UF.510.001: [UPDATE] UF510.001.106 - wjDBViewer - increased font size in header ........ ........ Felix.Neunkirchner 2025-02-12T14:21:18.992926Z Merged revision(s) 2243 from trunk: Merged revision(s) 2242 from tags/UF.510.001: [BUGFIX] UF510.001.105 - wjDevLink not dependent on ip arwin address ........ ........ Amin.Adra 2025-02-12T13:54:50.545008Z [ADD] Purge for TEA5 (Part4) carraige position Sanghoon.Kim 2025-02-12T10:10:09.209689Z [UPDATE] remove O4A460_Purge_through_Mold option, it will be a standard function from smart sequencer. Amin.Adra 2025-02-12T09:08:59.398557Z [ADD] Purge for TEA5 (Part3) - Option Purge Through Mold Albin.Kroell 2025-02-12T06:58:32.522003Z [UPDATE] End Position for Injection in Setting Mode. Sanghoon.Kim 2025-02-11T17:31:43.837358Z [ADD] Purge for TEA5 (Completed for standard purge) Amin.Adra 2025-02-11T16:10:44.721544Z [UPDATE] Improve SPC Table part 2 Sanghoon.Kim 2025-02-11T16:02:40.494170Z [ADD] Purge for TEA5 (Part3:not completed, but no problem to install to machine) Amin.Adra 2025-02-11T12:00:18.762841Z [ADD] Purge for TEA5 (Part2:not completed, but no problem to install to machine) Sanghoon.Kim 2025-02-10T16:53:26.645291Z [ADD] Purge for TEA5 (Part1:not completed, but no problem to install to machine) Sanghoon.Kim 2025-02-10T14:07:39.584203Z [BUGFIX] lubrication counter was not working (missing code) Sanghoon.Kim 2025-02-10T14:07:09.459591Z [BUGFIX] lubrication counter was not working Sanghoon.Kim 2025-02-10T09:35:02.280656Z [UPDATE] revert SVN.2223 Sanghoon.Kim 2025-02-10T09:34:08.010642Z [UPDATE] revert of SVN.2227 Mario.Sarajlic 2025-02-10T08:06:29.709232Z [BUGFIX] Greasing button visibility when motor is on fixed Albin.Kroell 2025-02-10T06:08:18.627204Z [UPDATE] max bad parts counter for 10 bzw. 100 shots threshold now mulitplied by cavity parts Sanghoon.Kim 2025-02-07T11:44:06.784679Z [UPDATE] ejector fwd/bwd delay timer on ejector page (TEA5) Sanghoon.Kim 2025-02-07T10:24:18.957923Z [UPDATE] Disable clamping force unit selection for TEA5 Sanghoon.Kim 2025-02-07T09:28:38.686659Z [UPDATE] Cycle start flag on smart sequencer TaeHwanRow 2025-02-07T07:01:15.547285Z [BUGFIX] Bug fix for disabling production management scope settings Commented out Albin.Kroell 2025-02-07T01:55:15.597232Z [UPDATE] ValveGate Closing step in Manual Mode Albin.Kroell 2025-02-07T01:54:45.010473Z [UPDATE] reset holdon for Plasticizing during MotorStandby Albin.Kroell 2025-02-06T10:43:14.332689Z [BUGFIX] added minimum feedback timer for switching on motors, when motor in standby Albin.Kroell 2025-02-06T08:57:46.980803Z [BUGFIX] MA_STAT.AbProductGoodBadCheck was not reseted at cyclestart; see comment in wjAut.s ln: 484 Albin.Kroell 2025-02-05T08:17:28.620429Z [BUGFIX] Reworked manual behaviour of positive Inj Movements Albin.Kroell 2025-02-05T06:25:17.211646Z [BUGFIX] Injection with no profile steps for holdon selected works now like disabled holdon pressure, with target position SOV-point; bugfix in MH -> type overflow SeongwonLee 2025-02-05T06:20:05.109304Z [UPDATE] Mold Ejector Parameter visible fixed for TEA5 Patrik.Tasch 2025-02-04T09:24:43.025512Z [BUGFIX] Alarm Texts Albin.Kroell 2025-02-04T07:12:53.555854Z [BUGFIX] In manual mode when negative moment was started with starting position < SOV Position, and Pressure was not reached, movement was not started and PID_HoldOnCtrl was not started. so holdon-time was counted down without movement. Felix.Neunkirchner 2025-01-31T13:09:52.693697Z Merged revision(s) 2206 from trunk: Merged revision(s) 2202 from tags/UF.510.001: [BUGFIX] UF510.001.102 wjFlexIO widget - create dynamic bindings in chunks to prevent visu rebooting due to processing load ........ ........ Albin.Kroell 2025-01-30T13:20:16.435821Z [UPDATE] Fixed Envelope Curve for Advanced Ejector Protection Patrik.Tasch 2025-01-28T11:06:11.896085Z [UPDATE] add Monthly data to Energy log Amin.Adra 2025-01-27T12:25:22.421758Z [Update] do not allow parameter set 2 if DSI option is 0 & default Wait for subchain finish Albin.Kroell 2025-01-24T13:53:26.037898Z [UPDATE] Calibration Process now working for Hybrid Machines, Calibration Page Reworked, but needs polishing (visit in HQ) Amin.Adra 2025-01-24T09:32:03.119613Z [Revert] wjTScon Patrik.Tasch 2025-01-24T08:15:27.069639Z [BUGFIX] Mode change to Manual when Auto is active and motor request off Amin.Adra 2025-01-23T08:56:04.982401Z [Update] wjTScon, prevent compiler error. add missing *.a file Felix.Neunkirchner 2025-01-22T15:55:34.654688Z Merged revision(s) 2168 from tags/UF.510.001: [BUGFIX] UF510.001.095 - eventlogger wrong calculation of entries per page, because of debug messages (only complete fixed with the use of new image version 7) ........ Felix.Neunkirchner 2025-01-22T15:35:43.042136Z Merged revision(s) 2169 from tags/UF.510.001: [UPDATE] UF510.001.096 - InfluxDB sync time between PLC <--> Raspberry PI every 10 minutes (small time difference after long time test) ........ Amin.Adra 2025-01-22T14:54:42.777751Z [Update] Replace wjHydLib with wjTScon Amin.Adra 2025-01-22T13:06:01.463048Z [BUGFIX] revert Axis Status Albin.Kroell 2025-01-22T12:59:31.664944Z [BUGFIX] 1st problem: wjPGen has now abort function to quit operation during holdon pressure phase, which created spikes in DRVdat[].Servo.nSet; 2nd Problem: Div10 error during holdon Pressure Release phase created unwanted behaviour Amin.Adra 2025-01-22T12:23:32.903844Z [BUGFIX] Axis Status Richard.Wagner 2025-01-22T10:31:15.101475Z [UPDATE] PGen / misc changes. intermediat commit to share data with albin / not finished yet Amin.Adra 2025-01-22T09:33:04.870248Z [BUGFIX] Cycle Start Interlock Robot SeongwonLee 2025-01-22T09:13:17.957250Z [BUGFIX] Motor key pressed time scale modify SeongwonLee 2025-01-22T07:33:46.475385Z [BUGFIX] KeyPlastHold Fixed Amin.Adra 2025-01-22T07:07:44.253093Z [BUGFIX] ChainCycleEndFlag SeongwonLee 2025-01-22T03:04:03.226585Z [UPDATE] Text for Heater Setting Page SeongwonLee 2025-01-22T02:35:52.317527Z [BUGFIX] if tonnage setting value is within range at the first start of auto mold height, modify auto mold height to succeed and finish Amin.Adra 2025-01-21T15:42:51.890636Z [UPDATE] Improve SPC Table Patrik.Tasch 2025-01-21T11:35:50.037872Z [UPDATE] Text for Heating Zones Amin.Adra 2025-01-20T14:38:24.096320Z Merged revision(s) 2143 from tags/UF.510.001: [BUGFIX] UF510.001.089 return 1 ........ Amin.Adra 2025-01-20T09:08:05.163526Z [UPDATE] if TEA5: smart sequencer fixed to ON Sanghoon.Kim 2025-01-16T18:17:08.938505Z [ADD] Add Injection pressure Mpa for TE Albin.Kroell 2025-01-14T14:16:42.146750Z [UPDATE] Advanced MoldProtection Working Sanghoon.Kim 2025-01-13T17:21:17.493470Z [UPDATE] TE:hide Force settings for clamp, ejector, maximum to 300% Moritz.Wurian 2025-01-13T13:14:12.229787Z [UPDATE] Parameter for Electric Force Output Patrik.Tasch 2025-01-13T08:53:41.368772Z [BUGFIX] Carriage in Setting mode; Energy Log Moritz.Wurian 2025-01-10T11:18:35.460224Z [UPDATE] new mapping for actPower KEBA SeongwonLee 2025-01-10T10:43:28.884373Z [UPDATE] injection grease sensor stop signal Patrik.Tasch 2025-01-10T09:41:10.271698Z [UPDATE] MH Adjustment Sanghoon.Kim 2025-01-10T09:05:13.008139Z [UPDATE] display torque percent on axis trace Patrik.Tasch 2025-01-10T08:01:39.078574Z [UPDATE] MH Speed in Setting Mode Patrik.Tasch 2025-01-10T07:23:44.245880Z [UPDATE]remove DL settings for TE Patrik.Tasch 2025-01-10T05:47:13.877368Z [UPDATE] Auto Decomp after Holdon Patrik.Tasch 2025-01-10T05:46:50.619155Z [BUGFIX] Clamp Status Sanghoon.Kim 2025-01-09T15:46:25.202266Z [UPDATE] update of PIDPositioningMode Sanghoon.Kim 2025-01-09T15:45:43.247804Z [UPDATE] UPDATE of mold protection max torque calculation Sanghoon.Kim 2025-01-09T13:01:42.954182Z [UPDATE] default footer buttons for TEA5 Patrik.Tasch 2025-01-09T12:36:34.277341Z [UPDATE]Translation Patrik.Tasch 2025-01-09T11:44:50.841832Z [UPDATE] deceleration to NEG Target Clamp Patrik.Tasch 2025-01-09T09:12:33.915642Z [UPDATE] Profile Graph Text Patrik.Tasch 2025-01-09T08:35:10.915529Z [UPDATE]Ejector Positioning; Mould Protection SeongwonLee 2025-01-09T07:24:47.147654Z [BUGFIX] grease button operation error When the motor is on; grease sensor type text change Patrik.Tasch 2025-01-09T03:13:10.408419Z [UPDATE] End Position Control Ejector Sanghoon.Kim 2025-01-08T17:06:52.641693Z [UPDATE] Move absolute/relative for Moldheight Patrik.Tasch 2025-01-08T16:21:20.115057Z [UPDATE] PID positioning Sanghoon.Kim 2025-01-08T14:14:02.785433Z [UPDATE] update for percent scale of clamp moving force Moritz.Wurian 2025-01-08T11:20:05.678058Z [UPDATE] add flexible SDO Communication input Richard.Wagner 2025-01-08T09:40:36.571875Z [UPDATE] PGen / PID Richard.Wagner 2025-01-08T09:32:36.061488Z [UPDATE] PGen / PID Patrik.Tasch 2025-01-08T09:08:53.643966Z [UPDATE] Schokobananen commit #RW Patrik.Tasch 2025-01-08T09:06:56.240202Z [UPDATE] PID positioning / not finished Albin.Kroell 2025-01-08T08:37:07.510745Z [BUGFIX] Monitor.vMeas was not written when external source for actVel was choosen. Patrik.Tasch 2025-01-08T08:12:13.502571Z [UPDATE] PID positioning / not finished Patrik.Tasch 2025-01-08T07:56:57.909816Z [UPDATE] PID positioning / not finished Richard.Wagner 2025-01-07T18:30:19.858099Z [UPDATE] PGen / PID Richard.Wagner 2025-01-07T18:20:36.336687Z [UPDATE] PGen / PID Sanghoon.Kim 2025-01-07T18:15:35.158302Z [UPDATE] update for clamping unit Sanghoon.Kim 2025-01-07T18:08:44.001470Z [UPDATE] update for simulation Albin.Kroell 2025-01-07T16:45:35.892650Z [UPDATE] Velocity mode for PGen Richard.Wagner 2025-01-07T16:07:46.048086Z [UPDATE] PGen / Vmeas direct input improvement Patrik.Tasch 2025-01-07T14:02:07.139722Z [UPDATE] change Sampling Time to tc_time #RW Richard.Wagner 2025-01-07T13:56:53.912200Z [UPDATE] PGen / Vmeas direct input improvement Patrik.Tasch 2025-01-07T06:10:32.479462Z [BUGFIX] Target inc MH Binding; Clamp Position Calculation SeongwonLee 2025-01-02T08:06:49.530545Z [BUGFIX] clamp closed overload error; hold pressure sov type SeongwonLee 2025-01-02T05:19:49.519556Z [BUGFIX] automatic moldheight is restarted after success TaeHwanRow 2024-12-31T09:03:12.967894Z [UPDATE]Fixed motor turning off when opening front safety door in semi auto mode SeongwonLee 2024-12-30T05:56:54.598611Z [UPDATE] Add Core Hydraulic Unit, CoreOverload; Add Inverter Alarm, Alarm reset SeongwonLee 2024-12-30T02:03:10.730375Z [UPDATE] Fix Visu mapping SeongwonLee 2024-12-30T01:16:59.620855Z [UPDATE] Add Toggle Oil for TEA5; Bugfix Lub Button SeongwonLee 2024-12-29T23:38:48.291721Z [BUGFIX] plastification is not working in the setting mode TaeHwanRow 2024-12-27T07:38:19.622804Z [BUGFIX] Fixed an issue where the motion monitoring time would not reset Sanghoon.Kim 2024-12-20T10:34:52.403957Z [UPDATE] Update of visibility of Energy report page Albin.Kroell 2024-12-20T10:13:30.399275Z [UPDATE] added PowerMonitoring to PDO on request of HQ on KEBA drives. Needs to be implemented into SDO afterwards. Sanghoon.Kim 2024-12-19T17:19:35.268606Z [BUGFIX] TEA5 : bugfix of CtrStep of ip_econ, update of movement end condition. Sanghoon.Kim 2024-12-19T17:18:02.658462Z [BUGFIX] bugfix of injection B Decomp2 checkbox Sanghoon.Kim 2024-12-19T15:29:37.189118Z [UPDATE] update of clamp, injection simulation Sanghoon.Kim 2024-12-19T15:28:54.411124Z [UPDATE] update of ejector end condition with limit switch, ejector simulation Sanghoon.Kim 2024-12-19T14:51:33.223252Z [BUGFIX] TEA5:bugfix of ejector status handling Sanghoon.Kim 2024-12-19T11:45:11.938645Z [BUGFIX] bad stopping of ejector backward (same as 2607) Sanghoon.Kim 2024-12-18T19:16:14.819583Z [BUGFIX] bugfix of wrong tolerance unit (tog_econ.c) Sanghoon.Kim 2024-12-18T19:12:47.600154Z [BUGFIX] bugfix of toggle LookupTable Confirmation button Sanghoon.Kim 2024-12-18T19:09:08.673315Z [BUGFIX] Bad stopping profile of Mold Close Mihaela.Chirita 2024-12-18T09:37:19.122349Z [BUGFIX] IP Adress / TAG Release ticket no.1600291894 Mario.Sarajlic 2024-12-17T08:03:27.528509Z [BUGFIX] Proper injection selected when switching to injection and carriage fix settings page (Merged revision(s) 2053 from trunk) Albin.Kroell 2024-12-16T17:04:43.543637Z [UPDATE] Cycle time violation during fixdata loading, after initial transfer, caused by extensive cycletime due to debugging mode. Sanghoon.Kim 2024-12-16T15:29:35.515202Z [UPDATE] Improve EDGE buffer function handling (only EDGE function executed specified limited condition) Felix.Neunkirchner 2024-12-16T14:03:44.408508Z Merged revision(s) 2047 from trunk: [UPDATE] wjFlexIO - device tag preparations ........ Sanghoon.Kim 2024-12-16T12:29:37.509696Z [UPDATE] delete unnecessary files on configs Sanghoon.Kim 2024-12-16T10:49:58.698208Z [UPDATE] Delete B&R ACP10_MC, ACP10man, ACP10par and related files Sanghoon.Kim 2024-12-13T11:22:14.238119Z [BUGFIX] bugfix for the injection axis status condition Sanghoon.Kim 2024-12-13T09:46:45.332871Z [UPDATE] remove old servopump parameters and pages Moritz.Wurian 2024-12-13T08:32:39.610361Z [UPDATE] Force Decomp before as Checkbox Moritz.Wurian 2024-12-13T03:34:25.654797Z [UPDATE] current status Kyungjin Albin.Kroell 2024-12-12T14:55:28.080821Z [UPDATE] PGEn Update to actVel from PDO. Solves Plastification mispositioning issues Moritz.Wurian 2024-12-12T13:01:17.716592Z [UPDATE] small modifications for motor.c Patrik.Tasch 2024-12-12T12:15:10.858173Z [BUGFIX] Core Interlock Sanghoon.Kim 2024-12-12T11:49:28.716023Z Merged revision(s) 2032 from branches/KyungJin: [UPDATE] Avoid resetting Core interlock after restart ........ Felix.Neunkirchner 2024-12-12T11:46:29.674872Z [UPDATE] Cpu.sw - only disable debugging on librarys where it is not locked by AS Patrik.Tasch 2024-12-12T10:08:34.090645Z [BUGFIX] Ejector Configured in Main Chain Sanghoon.Kim 2024-12-11T18:55:42.039880Z [UPDATE] update for the fixdata unit Sanghoon.Kim 2024-12-11T16:15:55.069175Z [UPDATE] change to array for MMI_DATA.PG.HP Felix.Neunkirchner 2024-12-11T14:40:03.413909Z Merged revision(s) 1991 from trunk: [UPDATE] InfluxDB - added FillLevelPercentage for ringbuffer + eventlogger entry when buffer is full ........ Sanghoon.Kim 2024-12-11T13:32:30.805491Z [UPDATE] update for minimum cushion position (include more braking phase) Sanghoon.Kim 2024-12-11T13:28:43.556603Z [UPDATE] add missing [BUGFIX] Remove MAX_NO_INJECTION_UNITS, merge to MAX_NO_INJ_AXIS (Possible memory leak) 2 Felix.Neunkirchner 2024-12-11T12:15:52.651309Z [UPDATE] Cpu.sw - disable debugging on all tasks and librarys Sanghoon.Kim 2024-12-11T10:37:14.035422Z [BUGFIX] Remove MAX_NO_INJECTION_UNITS, merge to MAX_NO_INJ_AXIS (Possible memory leak) Sanghoon.Kim 2024-12-11T10:16:01.244807Z [UPDATE] change to injection array for MMI_DATA.PG.IP Sanghoon.Kim 2024-12-11T10:14:46.181513Z [UPDATE] handling for ApFloat, AsFloat, AvFloat Sanghoon.Kim 2024-12-11T09:42:36.620428Z [UPDATE] disable ejector hold to run in simulation SeongwonLee 2024-12-11T06:26:00.650597Z [UPDATE] Add FoolProof Control Sanghoon.Kim 2024-12-10T20:07:45.836578Z [UPDATE] add missing data Felix.Neunkirchner 2024-12-10T15:47:02.073707Z [BUGFIX] wrong unit on reboot Sanghoon.Kim 2024-12-10T15:34:16.607755Z [UPDATE] update for unit conversion factor Sanghoon.Kim 2024-12-10T15:33:31.130936Z [UPDATE] update heating graph data to simple calculation with factor (for conversion to imperial unit) Sanghoon.Kim 2024-12-10T15:31:30.871543Z [UPDATE] update wjEnvelop data to simple calculation with factor (for conversion to imperial unit) Sanghoon.Kim 2024-12-10T15:25:10.765686Z [UPDATE] TE: add tolerance for forced decompression Patrik.Tasch 2024-12-10T14:23:02.749324Z [UPDATE] SPC Flag only for the last Clamp Open movement Patrik.Tasch 2024-12-10T12:52:17.826794Z [BUGFIX] SPC flag Sanghoon.Kim 2024-12-10T11:15:21.048084Z [UPDATE] reorganize the task for Quality table and remove the cycle time from Quality table. Albin.Kroell 2024-12-10T09:52:59.688653Z [UPDATE] Preparation for automatic clamping force adjustment Patrik.Tasch 2024-12-09T13:57:51.560189Z [BUGFIX] Core Interlock Sanghoon.Kim 2024-12-09T08:23:46.412355Z [UPDATE] display of plasticizing speed on status bar Sanghoon.Kim 2024-12-06T10:47:27.240417Z [ADD] add new oil preheat function Albin.Kroell 2024-12-06T10:30:25.777146Z [UPDATE] Reworked simplemouldprotection, added advanced mould protection, added new Variable ApTorquePct to AXdat; Ap_Lock scaling now with MaxPTiebarsensor; Sanghoon.Kim 2024-12-05T14:18:42.448804Z [UPDATE] unified cycle time with ACT_DATA.Timer.AtTotalCycle instead of ACT_DATA.System.AtCycleTime. Cycle counter start to end of cycle, not the injection. Add material monitoring time on selection. Sanghoon.Kim 2024-12-05T12:20:26.824396Z [BUGFIX] wrong text for hopper cooling valve type Sanghoon.Kim 2024-12-05T11:57:23.760931Z [UPDATE] avoid unnecessasry oil filter alarm Sanghoon.Kim 2024-12-05T11:56:18.432975Z [UPDATE] change holdon time unit with 0.01sec and limitation to 300 for short data type. Amin.Adra 2024-12-05T11:04:37.481727Z Merged revision(s) 1956 from branches/KyungJin: [BUGFIX] Enable Ejector if used ........ Moritz.Wurian 2024-12-04T06:20:36.538397Z [UPDATE] Fixed Datatype Problem Holdon Pressure Time Moritz.Wurian 2024-12-03T11:18:52.871516Z [UPDATE] Profile Graph Ejector + Clamp Moritz.Wurian 2024-12-03T02:29:13.563446Z [UPDATE] Screw Protection Timer Albin.Kroell 2024-12-02T14:26:46.617093Z [UPDATE] Actual Drive Load working Moritz.Wurian 2024-12-02T13:04:21.457629Z [UPDATE] Datashare Drivestate, Motorstate, SafetyGate, Nozzle Potentiometer Moritz.Wurian 2024-12-02T08:51:37.064511Z [UPDATE] small visu changes Amin.Adra 2024-12-02T08:31:33.781470Z [BUGFIX] Quality Table CPU crash ChanghakYeo 2024-11-29T02:41:42.813333Z [UPDATE] External Temperature Monitoring page, which was previously located within the HotRunner page, has been moved to the Mold Options page. Felix.Neunkirchner 2024-11-28T10:23:27.220968Z Merged revision(s) 1930 from tags/UF.510.001: Merged revision(s) 1928 from trunk: [BUGFIX] removed eventbinding to refresh device link after input of filename (???) Albin.Kroell 2024-11-28T10:11:21.363570Z [UPDATE] Graph function for CU, not finished Sanghoon.Kim 2024-11-28T08:26:03.846917Z [UPDATE] small update for TE Moritz.Wurian 2024-11-28T07:53:01.744665Z [UPDATE] Change of Drivetype variable and dropdown Albin.Kroell 2024-11-28T07:13:40.755060Z [UPDATE] reworked graphdata handling added ActTorquePct to Ejector. Albin.Kroell 2024-11-28T06:46:13.726006Z [UPDATE] reworked graphdata handling for TE Machines and CU Albin.Kroell 2024-11-28T03:20:41.523755Z [UPDATE] MouldProtection with Torque Limit, and added MachineSetting "Clamp Unit Force Percent" Richard.Wagner 2024-11-27T17:25:31.413149Z [UPDATE] CPU crash / FIX needed Moritz.Wurian 2024-11-27T14:17:37.902232Z [UPDATE] DriveType Visu bugfix Sanghoon.Kim 2024-11-27T11:53:50.982407Z [ADD] TE : add locking device for safety door Amin.Adra 2024-11-27T10:48:47.909786Z [BUGFIX] After load default sequence, Bug: reboot in service mode Albin.Kroell 2024-11-27T08:00:45.193058Z [UPDATE] Compiling Error Fixed. -> Will bring korean schokobanana Albin.Kroell 2024-11-27T07:58:13.527457Z [UPDATE] Mold Protection over time. Sanghoon.Kim 2024-11-27T06:00:31.913501Z [ADD] add Mold safe unlock tested Sanghoon.Kim 2024-11-27T01:02:31.936264Z [ADD] add Mold safe unlock V0.1 Moritz.Wurian 2024-11-26T14:14:52.625499Z [UPDATE] text ID and tmx file forced decomp Moritz.Wurian 2024-11-26T13:47:55.423080Z [UPDATE] SDO_Error fix, force decomp before with pressure Amin.Adra 2024-11-26T13:10:35.303924Z [BUGFIX] Advanced Ejector 3 TaeHwanRow 2024-11-26T12:04:35.327227Z [UPDATE] Manual Back Pressure setting moved to the Plastification page. Amin.Adra 2024-11-26T11:47:31.500801Z [BUGFIX] Advanced Ejector 2 Amin.Adra 2024-11-26T11:03:12.943357Z [BUGFIX] Advanced Ejector Sanghoon.Kim 2024-11-25T08:18:38.795614Z [UPDATE] Automatic moldheight for TEA5 Albin.Kroell 2024-11-22T04:59:23.162509Z [UPDATE] improvised solution for hybrid machine to calibrate Injection axis. Patrik.Tasch 2024-11-21T07:59:49.514306Z [UPDATE] MH Adjustment TH Sanghoon.Kim 2024-11-21T05:41:58.997190Z [UPDATE] wrong plastcizing speed scale, oilcoolingfilter alarm, manual backpressure limit Albin.Kroell 2024-11-21T01:01:48.929556Z [UPDATE] added sstol to Mold Open Pos in step check clamp open Albin.Kroell 2024-11-21T00:18:50.916643Z [UPDATE] minor changes Albin.Kroell 2024-11-20T13:45:17.712224Z [UPDATE] ActTorque reading now equal for KEB and KEBA Sanghoon.Kim 2024-11-20T12:55:43.759756Z [ADD] TE: add missing position tolerance (SsTol) Albin.Kroell 2024-11-20T12:08:30.999526Z [UPDATE] actTorque from percent to Nm in KEBA; Bugfix in drivestate Sanghoon.Kim 2024-11-20T10:54:54.929016Z [BUGFIX] TE:bugfix of wrong profile position (AXdat pointer) Moritz.Wurian 2024-11-20T08:15:10.437594Z [UPDATE] small changes for testing Sanghoon.Kim 2024-11-20T07:53:36.792682Z [ADD] TE:add overshoot protection for holdon pressure controller (only for pressure rising at first step) Albin.Kroell 2024-11-20T06:33:56.188794Z [UPDATE] added deadlock protection timers to drivestate Sanghoon.Kim 2024-11-20T05:04:10.115434Z [UPDATE] TE: disable TScon for decompression, Update for holdon pressure control Albin.Kroell 2024-11-20T01:32:35.147146Z [BUGFIX] Motor on after Standby Albin.Kroell 2024-11-19T13:23:12.264352Z [UPDATE] reworked wjDrive Motor, and added status motor_stdby when door is opened in semi auto or manual Albin.Kroell 2024-11-19T09:41:32.112756Z [BUGFIX] DriveState was stuck after emergency stop or safety gate Albin.Kroell 2024-11-19T09:09:42.847328Z [UPDATE] Fixed Writing ModeOfOperation on Startup; had effect on DriveState, now DriveState = 0 when no Mode of Operation set Sanghoon.Kim 2024-11-19T00:38:05.503839Z [UPDATE] bugfix of nSet, after injection, still remain the nSet and suckback all the time. Sanghoon.Kim 2024-11-19T00:36:52.766345Z [UPDATE] add missing actual data Felix.Neunkirchner 2024-11-15T09:58:51.820195Z Merged revision(s) 1853 from trunk: [BUGFIX] fixed timing problem on eventlogger sql inserts ........ Sanghoon.Kim 2024-11-15T04:55:20.548624Z [UPDATE] add initial setting of parameter Sanghoon.Kim 2024-11-15T04:10:37.622675Z [UPDATE] increase of max torque percent, wrong nAct data Sanghoon.Kim 2024-11-15T04:08:00.493235Z [UPDATE] update command TSconPLC for parameterSet changes Sanghoon.Kim 2024-11-15T04:06:50.803721Z [UPDATE] disable pump selection for electric axis Sanghoon.Kim 2024-11-15T04:05:49.638951Z [UPDATE] TE backpressure control, holdon control, wrong maxspeed calculation Sanghoon.Kim 2024-11-15T03:46:16.246559Z [REVERT] revert the SVN.1831 not tested version (better to be tested in branch version) Felix.Neunkirchner 2024-11-14T11:01:45.752164Z Merged revision(s) 1837 from tags/UF.510.001: [UPDATE] UF.501.001.052 - add SI2 tp wjDynAut, bugfix ........ Felix.Neunkirchner 2024-11-14T09:06:34.303865Z Merged revision(s) 1834 from tags/UF.510.001: [UPDATE] UF.501.001.051 - add SI2 tp wjDynAut ........ Albin.Kroell 2024-11-13T16:47:49.367895Z [UPDATE] Fixed wrong ApFloat for TScon for Injection while Positive Movement; Preversion of crawling speed working but needs to be improved. Compiling works. Richard.Wagner 2024-11-13T13:40:13.100046Z [UPDATE] PGen / only PGen. Maybe this verions do not compile Albin.Kroell 2024-11-12T15:54:08.890917Z [UPDATE] Changed initial setup for Mode of Operation Albin.Kroell 2024-11-12T15:20:23.918690Z [UPDATE] Clamp Force display #PT Patrik.Tasch 2024-11-12T09:32:54.609526Z [UPDATE] MH Adjustment Richard.Wagner 2024-11-12T07:06:04.830056Z [UPDATE] DriveState, Compiler Error Richard.Wagner 2024-11-12T06:50:23.697371Z [UPDATE] DriveState Albin.Kroell 2024-11-11T13:58:10.081869Z [UPDATE] Added Forced Decompression before Plasticizing. Albin.Kroell 2024-11-08T11:54:29.784414Z [UPDATE] without tscon always 100 percent torque Amin.Adra 2024-11-06T15:20:32.981616Z [UPDATE] Cpu.sw Albin.Kroell 2024-11-06T14:58:06.674149Z [BUGFIX] removed task ipAddrUpda Amin.Adra 2024-11-06T14:50:55.457053Z [UPDATE] revert revisions 1806 and 1797 Sanghoon.Kim 2024-11-06T11:20:11.010729Z [ADD] UF.510.001.048 Add Euromap67.1 ........Merged revision(s) 1809 from tags/UF.510.001: Sanghoon.Kim 2024-11-06T11:19:11.415357Z [BUGFIX] UF.510.001.047 bugfix of hotrunner sensor type issue (only for TH, TH have temperature module on X20CPU side, DL is on separated powerlink node) ........Merged revision(s) 1804 from tags/UF.510.001: Albin.Kroell 2024-11-06T10:25:17.367726Z [BUGFIX] Missing OPCUA variable Amin.Adra 2024-11-06T10:01:33.400600Z [UPDATE] SS DSI Select Parameters Set Felix.Neunkirchner 2024-11-05T14:58:24.992987Z Merged revision(s) 1798 from trunk: [BUGFIX] set datachange after confirm dialog submit ........ Amin.Adra 2024-11-05T13:49:39.908121Z Merged revision(s) from trunk: [UPDATE] improve SS ........ Albin.Kroell 2024-11-05T13:21:32.542194Z [UPDATE] For test in machine hall Albin.Kroell 2024-11-04T15:21:50.082875Z [UPDATE] speed limitation during holdonpressure, for testing in machine hall. Moritz.Wurian 2024-11-04T11:04:21.321289Z [UPDATE] Hopper cooling fixed Felix.Neunkirchner 2024-11-04T09:58:46.353225Z Merged revision(s) 1786 from tags/UF.510.001: [UPDATE] UF510.001.043 - disabled all rec/fix data operations when automatic/semiautomatic mode is active; moved SDM pages to fixpages (Overview->2nd tab) ........ Felix.Neunkirchner 2024-11-04T09:40:27.099967Z [UPDATE] new version of wjDevLink merged Albin.Kroell 2024-10-31T13:56:24.872827Z [BUGFIX] SetVelocity in MoldHeight and TonnageBuildUp wrong Albin.Kroell 2024-10-31T13:42:14.532243Z [UPDATE] Safety Door in Semi Auto Mode #PT Albin.Kroell 2024-10-31T11:17:26.340100Z [UPDATE] added module ok to startup sequence Albin.Kroell 2024-10-31T11:00:44.506867Z [UPDATE] Bugfix DriveState Deadlock KEBA Albin.Kroell 2024-10-31T09:50:16.284762Z [UPDATE] changed MotorOff in SemiAuto: Added MOTOR_REQ_OFF_STDBY Amin.Adra 2024-10-31T07:25:57.780402Z [Add] Motor Status Semi Automatic Mode part 4 to Herr Tasch Albin.Kroell 2024-10-30T14:03:41.960123Z [UPDATE] added comments to auxilliary stop sequence Albin.Kroell 2024-10-30T13:48:36.137976Z [UPDATE] get Beta 3 running on DL Amin.Adra 2024-10-30T13:31:04.299409Z [Add] Motor Status Semi Automatic Mode part 3 Albin.Kroell 2024-10-30T13:26:00.660375Z [UPDATE] moved DriveType in MA_FIX.GEN. structure; small Bugfixes in Drivehandling; added AuxStop to DRVdat.Cmd structure for auxilliary stop of drivestatemachine, to switch of in smartsequencer Amin.Adra 2024-10-30T12:56:51.537578Z [Add] Motor Status Semi Automatic Mode part 2 Amin.Adra 2024-10-30T12:53:09.267219Z [Add] Motor Status Semi Automatic Mode part 1 Amin.Adra 2024-10-30T09:31:01.763003Z [BUGFIX] Safety Door openinig, Semi Automatic Mode 3 Moritz.Wurian 2024-10-30T08:47:55.108529Z [UPDATE] Pointer Page for Drives Amin.Adra 2024-10-30T07:20:07.285257Z [BUGFIX] Safety Door openinig, Semi Automatic Mode 2 Felix.Neunkirchner 2024-10-29T14:18:09.651025Z [UPDATE] wjLanguageSelector - language order Albin.Kroell 2024-10-29T14:13:03.455656Z [UPDATE] MA_FIX.DriveType und TSactive manually selectable Felix.Neunkirchner 2024-10-29T14:05:42.829656Z Merged revision(s) 1762 from trunk: Merged revision(s) 1754 from tags/UF.510.001: [UPDATE] UF510.001.042 - progressbar instead of spinner in on language change ........ Merged revision(s) 1750 from tags/UF.510.001: [UPDATE] UF510.001.040 - delay after language change - used to avoid changing the language when not finished loading current language ........ ........ Felix.Neunkirchner 2024-10-29T12:41:44.857570Z Merged revision(s) 1745 from tags/UF.510.001: [UPDATE] UF510.001.037 - added delay on previos/next button; change OPCUA server timers to default; two->one eventbinding for ContentLoad variable; increased idle timer to 2000 ........ Amin.Adra 2024-10-29T10:55:18.278904Z [BUGFIX] Safety Door openinig, Semi Automatic Mode Patrik.Tasch 2024-10-29T09:40:04.929251Z [BUGFIX] Injection Pressure Graph Amin.Adra 2024-10-29T09:13:29.079969Z [UPDATE] IP3 IU3 FIX PAR Patrik.Tasch 2024-10-29T07:27:06.924180Z [UPDATE] remove Logger Errors Sanghoon.Kim 2024-10-22T17:00:21.711056Z [UPDATE] UF510.001.033 Initial IO info loading from IO_Info.CSV will e only with button, instead of automatic loading. ........Merged revision(s) 1714 from tags/UF.510.001: Moritz.Wurian 2024-10-22T07:35:46.001892Z [UPDATE] add fb10 = 500µs to KEB dat files Mihaela.Chirita 2024-10-18T12:03:51.677771Z [BUGFIX] Tolerance time setting on each axis limitation; ticket no. 1662484926 Sanghoon.Kim 2024-10-18T11:43:42.787934Z [UPDATE] Bugfix dreiction and standstill torque ........Merged revision(s) 1668 from beta/UF.510.003-BETA_preliminary_RW: Sanghoon.Kim 2024-10-18T11:42:29.323277Z [UPDATE] changed TE to KEBA drives, and fixed statemachine for KEBA drives. Additionally some merges, from yesterday from BETA3 ........Merged revision(s) 1667 from beta/UF.510.003-BETA_preliminary_RW: Felix.Neunkirchner 2024-10-17T15:14:24.863098Z Merged revision(s) 1664 from trunk: [UPDATE] wjPageMenu preCached to avoid problems on first bootup ........ Sanghoon.Kim 2024-10-17T13:54:08.133487Z [BUGFIX] bugfix XX display for pSet, nSet Sanghoon.Kim 2024-10-17T13:41:59.886844Z [ADD] Merge every changes from UF.510.003-BETA_preliminary_RW Sanghoon.Kim 2024-10-17T12:49:13.613780Z [ADD] disable pump selection for electric injection Richard.Wagner 2024-10-17T09:26:47.500766Z Merged revision(s) 1654 from beta/UF.510.003-BETA_preliminary_RW: [BUGFIX_CRITICAL] PGen, CPU crash, caused from carbage-data because of missing local variables initialization ........ Bozidar.Tomic 2024-10-16T05:51:32.155930Z [ADD] FlexConfig 400 and 500 (BR,KEB/KEBA) Sanghoon.Kim 2024-10-15T09:25:37.246811Z [BUGFIX] UF.510.001.001 The automatic cycle could not start in static chain.. Merge SVN.1459 Sanghoon.Kim 2024-10-14T17:30:12.203702Z [UPDATE] small update on inj_econ Sanghoon.Kim 2024-10-14T17:29:33.343859Z [BUGFIX] bugfix of tonnage with bar in statusbar Sanghoon.Kim 2024-10-14T17:28:53.732660Z [UPDATE] update cascade controller with injection status (to be also working with new ip_econ) Sanghoon.Kim 2024-10-14T10:41:23.157474Z [BUGFIX] influxDB - fix wrong unit, not wrong variable connection, tiebar position ........Merged revision(s) 1364 from beta/UF.510.001-BETA: Sanghoon.Kim 2024-10-14T10:39:24.618914Z [BUGFIX] InfluxDB - fixed tiebar postition always 0 (use As variable instead of AsFloat) + only record data in automatic mode ........Merged revision(s) 1358 from beta/UF.510.001-BETA: Sanghoon.Kim 2024-10-14T10:18:48.412166Z [UPDATE] Add Alarm for Rotary Homing (wrong position) ...Merge SVN.1329, except wjSPCon Sanghoon.Kim 2024-10-14T10:14:15.719578Z [BUGFIX] Resume sc_man task ...Merge SVN.1328 Sanghoon.Kim 2024-10-14T10:13:02.496448Z [BUGFIX] add missing decompression during purge (static chain) ...Merge SVN.1324 Sanghoon.Kim 2024-10-14T10:11:51.159887Z [BUGFIX] Safety Door Closing/Opening ...Merge SVN.1323 Sanghoon.Kim 2024-10-14T10:07:34.679481Z [BUGFIX] bugfix for recipe data error 20798 (temporary) ...Merge SVN.1307 Sanghoon.Kim 2024-10-14T10:06:16.387506Z [BUGFIX] carriage offset need extra data copy or minmax calculation ...Merge SVN.1299 Sanghoon.Kim 2024-10-14T09:57:49.255116Z [BUGFIX] Save Rec/Fix Data to USB...Merge SVN.1293 Sanghoon.Kim 2024-10-14T09:34:16.015467Z [BUGFIX] Bugfixes for Rotary Table TH #1490800682 ...Merge Svn.1273 Sanghoon.Kim 2024-10-14T09:07:26.468099Z [BUGFIX] - wjFlexIO reload when io mapping array changed ........Merge Svn.1260 Sanghoon.Kim 2024-10-14T08:58:26.150362Z [UPDATE] change visibility of ejector mode group box, due to a index 3 manual mode selection. [Merge] SVN.1257 Sanghoon.Kim 2024-10-14T08:54:39.327975Z [BUGFIX] Material Monitoring Time [Merge] SVN.1255 Felix.Neunkirchner 2024-10-14T08:45:22.012983Z Merged revision(s) 1604 from trunk: [UPDATE] InfluxDB - actual/set pressure kN instead on ton ........ Felix.Neunkirchner 2024-10-14T08:24:32.028438Z Merged revision(s) 1599 from trunk: [UPDATE] InfluxDB - changed Status to CtrStep, added set tonnage ........ Albin.Kroell 2024-10-14T07:19:02.948355Z [BUGFIX] Fixed IP_FIX Pointer for inj_econ Albin.Kroell 2024-10-11T12:02:39.928616Z [UPDATE] fixed keyhold for Plast2; added scaling for Pressure IP2, made set of ap_scale.y2 cycle and not in init_axes function; fixed type problem for IP_FIX.GEN.SpMaxSensor; fixed Positions for Dynamic Cycle for IP2 DecompBefore Sanghoon.Kim 2024-10-11T11:04:25.563729Z <Merged>[BUGFIX] bugfix of TH tonnage calculation in case of no clamping force sensor. Rev.1243 Sanghoon.Kim 2024-10-11T11:01:51.975817Z <Merged>[BUG] UPDATE: set default values for envelope quality graph (ticket 1590726938) ........Rev.1234 Sanghoon.Kim 2024-10-11T10:59:33.619161Z <Merged> Merged revision(s) 1230 from trunk: [BUG] set default values for envelope quality graph (ticket 1590726938) ........ Sanghoon.Kim 2024-10-11T10:56:09.001324Z [BUGFIX] complete merged for hide mould heating <Merged>merged trunk revision 1191 Sanghoon.Kim 2024-10-11T10:50:52.593942Z [ADD] Add contact type for grease level sensor, Merge Rev.1196 Sanghoon.Kim 2024-10-11T10:33:38.215819Z [BUGFIX] bugfix of ACT_DATA on inj_econ Amin.Adra 2024-10-11T08:28:40.127329Z [BUGFIX] Chose Parameters Mihaela.Chirita 2024-10-10T12:34:33.940400Z [UPDATE]Automatic hardware load after firmware transfer; ticket no.1600674448 Albin.Kroell 2024-10-10T10:47:45.462997Z [UPDATE] Updated Memory config for Flex config, and Iomapping for CP1686X_Hybrid Amin.Adra 2024-10-10T08:10:53.808105Z [Update] Config View Core in main Chain Felix.Neunkirchner 2024-10-10T07:43:19.696903Z Merged revision(s) 1582 from trunk: [BUGFIX] footer tab navigation ........ Albin.Kroell 2024-10-10T03:33:22.212932Z [UPDATE] Removed Initial Transfer Albin.Kroell 2024-10-10T03:24:09.646476Z [BUGFIX] Problem with SSI Encoder Clamp missing setting ignore ParityBit and set binding for Clamp Position ; Changed RT-Version to H4.91 (from G); Sanghoon.Kim 2024-10-09T15:08:14.123634Z [BUGFIX] UF.510.001.018 interlock problem for Injection B ........ Merged revision(s) 1574 from branches/UF.510.003-BETA_DSI: Amin.Adra 2024-10-09T14:47:13.532613Z [Update] Variable name Amin.Adra 2024-10-09T14:36:37.259868Z Merged revision(s) 1564 from branches/UF.510.003-BETA_DSI: [UPDATE] Visible the core settings also on Main chain, hide the die-slider steps ........ Amin.Adra 2024-10-09T14:36:03.977686Z Merged revision(s) 1558 from branches/UF.510.003-BETA_DSI: [BUGFIX] Popup Core ........ Amin.Adra 2024-10-09T14:35:01.492551Z Merged revision(s) 1554 from branches/UF.510.003-BETA_DSI: [ADD] Data for IPA_2 ........ Amin.Adra 2024-10-09T14:34:37.877864Z Merged revision(s) 1550 from branches/UF.510.003-BETA_DSI: [ADD] wjDynAut bindings for DI4 in Main Chain ........ Amin.Adra 2024-10-09T14:33:44.091470Z Merged revision(s) 1531 from branches/UF.510.003-BETA_DSI: [UPDATE] DSI: CycleEndFlag Start Conditions For SS and more Merged revision(s) 1297 from trunk: [BUGFIX] timers for injeciton B ........ Merged revision(s) 1294 from trunk: [BUGFIX] Enabled Valve Gate in SS ........ Merged revision(s) 1291 from trunk: [BUGFIX] Stop Automatic cycle at cycle end ........ Merged revision(s) 1530 from beta/UF.510.003-BETA: [ADD] Preparation for new Injection option for Amin (A A+ B B+) ........ ........ Amin.Adra 2024-10-09T14:31:30.363415Z Merged revision(s) 1528 from branches/UF.510.003-BETA_DSI: [ADD] Select Parameter from SS for DSI ........ Amin.Adra 2024-10-09T14:30:05.415474Z Merged revision(s) 1519 from branches/UF.510.003-BETA_DSI: [ADD] DieSlide Step to Smart Sequencer ........ Amin.Adra 2024-10-09T14:27:50.005094Z Merged revision(s) 1514 from branches/UF.510.003-BETA_DSI: [BUGFIX] MAX NR AXSIS, Edit Mode SS ........ Felix.Neunkirchner 2024-10-09T10:55:58.999162Z [UPDATE] wjDynAut widget up2date Albin.Kroell 2024-10-09T09:27:44.478486Z [BUGFIX] Fixed axis selection on calibration page Richard.Wagner 2024-10-09T09:17:31.359896Z [UPDATE] test Felix.Neunkirchner 2024-10-09T08:08:35.556685Z Merged revision(s) 1537 from trunk to all betas: [UPDATE] wjPageMenu - change concept.. open/closing the menu handled directly by js instead of plc binding ........ Albin.Kroell 2024-10-09T06:04:46.414383Z [BUGFIX] Unit Problem with Screw-Data Injection2 (affected calc for Max Sensor Pressure, and on machines before wjDrive only SQC-Shot-Data) Richard.Wagner 2024-10-08T06:51:45.218278Z [UPDATE] Holdon Prs release test Moritz.Wurian 2024-10-07T15:34:58.403051Z [UPDATE] rename broken sensor mode to open loop mode Richard.Wagner 2024-10-04T09:32:12.012038Z [BUGFIX] Compiler Error Mario.Sarajlic 2024-10-03T11:21:44.034531Z [ADD] Preparation for new Injection option for Amin (A A+ B B+) Patrik.Tasch 2024-10-01T12:56:52.436348Z [BUGFIX] Pressure Simulation IP Mihaela.Chirita 2024-10-01T10:11:16.092133Z [BUGFIX] stroke on plastification profile graph; ticket no.1645533002 Sanghoon.Kim 2024-10-01T08:52:21.556851Z [ADD] Add the optional(split) injection for inj_econ Mihaela.Chirita 2024-10-01T08:51:17.765970Z [BUGFIX] back pressure label for plasticizing page (ticket no.1645533002) Richard.Wagner 2024-09-28T03:21:46.741598Z [UPDATE] DL650 2K Hybrid commissioning / not finished yet Felix.Neunkirchner 2024-09-27T12:03:12.927749Z [UPDATE] UF510.001.000.008 update wjDBViewer on every new shotNr ........Merged revision(s) 1501 from trunk: Felix.Neunkirchner 2024-09-27T10:53:50.154450Z Merged revision(s) 1498 from trunk to betas: [BUGFIX] UF.510.001.006 set plc ip function Albin.Kroell 2024-09-27T10:20:15.948049Z [UPDATE] added sstol for clamp open position in tog_econ (step F_STEP_NORMAL_MOVE_POS and F_STEP_SETTING_MOVE_POS) Richard.Wagner 2024-09-27T10:05:02.258722Z [BUGFIX] IP2 decompression before target pos Richard.Wagner 2024-09-27T09:32:14.979254Z [UPDATE] DL650 2K Hybrid commissioning / not finished yet Richard.Wagner 2024-09-27T09:20:20.186179Z [UPDATE] Plast Target Pos Richard.Wagner 2024-09-27T08:22:49.198405Z [UPDATE] Speed Limiter Patrik.Tasch 2024-09-27T07:38:01.859170Z [UPDATE] Extended alarm snippets for KEB drive Richard.Wagner 2024-09-27T07:13:25.949432Z [UPDATE] DL650 2K Hybrid commissioning / not finished yet Richard.Wagner 2024-09-27T02:47:55.965871Z [UPDATE] DL650 2K Hybrid commissioning / not finished yet Richard.Wagner 2024-09-27T02:47:31.487059Z [UPDATE] PID library for better parameter adjustment Richard.Wagner 2024-09-27T02:46:59.987744Z [UPDATE] KEB Dat Files for Hydraulic Albin.Kroell 2024-09-26T15:06:22.959189Z [BUGFIX] Calculation in for POS.Org.TargetPos in call wjDynAuto for Decomp Before; added SsTol Richard.Wagner 2024-09-26T13:20:23.953312Z [UPDATE] DL650 2K Hybrid commissioning / not finished yet Patrik.Tasch 2024-09-26T12:25:58.596128Z [UPDATE]remove Fix Mold Valve Open page Albin.Kroell 2024-09-26T11:19:48.282622Z [BUGFIX] copy paste error for minimum voltage error pressure sensor Richard.Wagner 2024-09-26T09:06:24.913178Z [UPDATE] DL650 2K Hybrid commissioning / not finished yet Richard.Wagner 2024-09-26T07:41:42.069393Z [UPDATE] DL650 2K Hybrid commissioning / not finished yet Richard.Wagner 2024-09-26T07:41:28.399066Z [BUGFIX] IP Axis, PGen init, IP2 Richard.Wagner 2024-09-26T01:26:09.931672Z [UPDATE] DL650 2K Hybrid commissioning / not finished yet Albin.Kroell 2024-09-25T14:29:23.627515Z [UPDATE] Calibration Group Boxes visibility of axis Richard.Wagner 2024-09-25T13:28:13.308126Z [UPDATE] DL650 2K Hybrid commissioning / not finished yet Albin.Kroell 2024-09-25T13:27:59.568433Z [UPDATE] Bug in Writing ModeOfOperation Albin.Kroell 2024-09-25T11:51:12.777541Z [UPDATE] Intermediate commit for PC in machine hall Mihaela.Chirita 2024-09-25T07:56:05.071669Z [BUGFIX] put back binding files Mihaela.Chirita 2024-09-25T06:54:34.893073Z [BUGFIX] The key screen raw material exchange button cannot be added; ticket no. 1636754136 Albin.Kroell 2024-09-24T14:00:51.577176Z [UPDATE] Fixed Bug SDO read Parameter 29 Richard.Wagner 2024-09-24T12:01:05.847713Z [UPDATE] DL650 2K Hybrid commissioning / not finished yet Richard.Wagner 2024-09-24T12:00:49.072382Z [UPDATE] DL650 2K Hybrid commissioning / not finished yet Albin.Kroell 2024-09-24T10:39:04.524942Z [UPDATE] Fixed null pointer error in SDO Read Communication Richard.Wagner 2024-09-24T06:27:56.044523Z [UPDATE] DL650 2K Hybrid commissioning / not finished yet Richard.Wagner 2024-09-24T05:20:57.637352Z [UPDATE] DL650 2K Hybrid commissioning / not finished yet Albin.Kroell 2024-09-23T13:56:46.272791Z [UPDATE] bugfix in wjDrive: MaxTorque was not written to PDO when TSactive == 0; bugfix in ax_con: multiplication error for torque. Albin.Kroell 2024-09-23T12:43:05.870724Z [UPDATE] Fixed mem-Access Violation in init_PGen Function Richard.Wagner 2024-09-23T11:46:29.361316Z [UPDATE] DL650 2K Hybrid commissioning / not finished yet Sanghoon.Kim 2024-09-23T10:46:39.907134Z [UPDATE] task manger ip_econ to inj_econ Patrik.Tasch 2024-09-23T08:51:54.830017Z [BUGFIX] Motor Reverse ToggleSwitch Richard.Wagner 2024-09-23T07:29:30.171814Z [UPDATE] DL650 2K Hybrid commissioning / not finished yet Richard.Wagner 2024-09-23T06:09:55.444217Z [UPDATE] DL650 2K Hybrid commissioning / not finished yet Richard.Wagner 2024-09-23T01:44:12.753725Z [UPDATE] DL650 2K Hybrid commissioning / not finished yet Richard.Wagner 2024-09-23T01:43:36.842733Z [UPDATE] DL650 2K Hybrid commissioning / not finished yet Richard.Wagner 2024-09-22T23:20:37.056900Z [UPDATE] DL650 2K Hybrid commissioning / not finished yet Richard.Wagner 2024-09-22T09:32:10.687064Z [UPDATE] DL650 2K Hybrid commissioning / not finished yet ChanghakYeo 2024-09-22T08:36:07.757463Z [UPDATE] DL650 2K Hybrid update var config Richard.Wagner 2024-09-22T07:38:15.069818Z [UPDATE] DL650 2K Hybrid commissioning / not finished yet / add hardware config Richard.Wagner 2024-09-22T06:58:52.312102Z [UPDATE] DL650 2K Hybrid commissioning / not finished yet Albin.Kroell 2024-09-20T10:43:54.504184Z [UPDATE] Bugfix function call Drive_DriveState now also without simulation Albin.Kroell 2024-09-20T10:06:12.798290Z [UPDATE] bugfix in drive_configured (slave drives ignored) Albin.Kroell 2024-09-20T09:28:28.769179Z [UPDATE] DRVdat_Sim[].Config.Drive_Configured set by machinetype Sanghoon.Kim 2024-09-19T16:24:16.443547Z [UPDATE] ContMode for slave pump axis Patrik.Tasch 2024-09-19T11:31:30.528976Z [UPDATE] removed ServoPump Fix Page Patrik.Tasch 2024-09-19T09:42:21.215384Z [UPDATE] change bindings on Hydraulic Lib page to TSconPLC Albin.Kroell 2024-09-19T09:08:51.391342Z [UPDATE] TE170_HALLE memory config adjusted; bugfix datfile selection Richard.Wagner 2024-09-19T07:43:07.697323Z [UPDATE] wjDrive - not finished yet Richard.Wagner 2024-09-19T07:39:05.035143Z [UPDATE] wjDrive - not finished yet Albin.Kroell 2024-09-19T07:38:55.948231Z [UPDATE] added dat files for DL650 Hybrid and simplified datfile selection as provisorium until a better way is developed Sanghoon.Kim 2024-09-18T17:49:37.808534Z [UPDATE] update for DRVdat Sanghoon.Kim 2024-09-18T13:27:15.641312Z Merged revision(s) 1387 from beta/UF.510.001-BETA: [UPDATE] limitation of ejector backward profile position ........ Patrik.Tasch 2024-09-18T13:21:55.988320Z [UPDATE] change gSPump binding to DRVdat Richard.Wagner 2024-09-18T13:21:02.977488Z [UPDATE] wjDrive - not finished yet Richard.Wagner 2024-09-18T12:31:33.982741Z [UPDATE] wjDrive - not finished yet Mario.Sarajlic 2024-09-18T12:26:42.972258Z [BUGFIX] Clamp status bar XX fix Richard.Wagner 2024-09-18T11:52:52.247938Z [UPDATE] wjDrive - not finished yet Mario.Sarajlic 2024-09-18T11:49:35.279820Z [ADD] Merged revision(s) 1418 from beta/UF.510.001-BETA: Added lubrication button even when motor is off if option exists Patrik.Tasch 2024-09-18T10:03:19.912407Z Merged revision(s) 1415 from beta/UF.510.001-BETA: Merged revision(s) 1412 from trunk: [UPDATE] Remove DecimalPlace for Holdon Speed ........ ........ Richard.Wagner 2024-09-18T08:52:08.368161Z [UPDATE] Remove MOdat.*AbOn Richard.Wagner 2024-09-18T08:29:58.759209Z [UPDATE] wjDrive - not finished yet Richard.Wagner 2024-09-18T07:28:37.469041Z [UPDATE] wjDrive - not finished yet Albin.Kroell 2024-09-17T14:12:42.069787Z [UPDATE] Replaced PU_FIX Sensor scaling parameters by MA_FIX.Drive[xy].HydLib.HydPar.sensor. parameters Albin.Kroell 2024-09-17T13:29:54.435793Z [UPDATE] Reworked ServoPump Parameter Page for new DRVdat Structure Mario.Sarajlic 2024-09-17T13:11:24.189651Z [BUGFIX] Rec loading text fix Felix.Neunkirchner 2024-09-17T12:16:10.552256Z [BUGFIX] wjDevLink/Main.c Felix.Neunkirchner 2024-09-17T12:09:08.346576Z Merged revision(s) 1270 from beta/UF.510.001-BETA: [UPDATE] cachingSlots increased to 300; mappView server client connections set to 1; set protocol to http (https was never used) ........ Felix.Neunkirchner 2024-09-17T12:08:30.379549Z Merged revision(s) 1189 from beta/UF.510.001-BETA: [UPDATE] wjNumericInput - update min/max limitations even when the numpad is opened already ........ Felix.Neunkirchner 2024-09-17T12:04:32.522752Z Merged revision(s) 1343 from beta/UF.510.001-BETA: [BUGFIX] dat_save - added nodeJSRefresh flag to copy steps to refresh the folder in the background on linux Felix.Neunkirchner 2024-09-17T12:03:07.619275Z Merged revision(s) 1280 from beta/UF.510.001-BETA: [UPDATE] set B&R clients to 0 (old setting, not supported from mappView 5.12) Felix.Neunkirchner 2024-09-17T12:02:18.148585Z Merged revision(s) 1312 from beta/UF.510.001-BETA: [BUGFIX] wjDevLink in error state after bootup (eventbinding to update wjDevlink too early) Felix.Neunkirchner 2024-09-17T12:01:16.906219Z Merged revision(s) 1282 from beta/UF.510.001-BETA: [UPDATE] SS - added text id instead of fixed text; chaged "Label" to "Loop" in steps 64,65 ........ Felix.Neunkirchner 2024-09-17T11:59:28.174074Z Merged revision(s) 1278 from beta/UF.510.001-BETA: [UPDATE] added function to read IP addresses directly from URL and session variable (instead of VisuStartUp) Richard.Wagner 2024-09-17T08:43:49.592084Z [UPDATE] wjDrive - not finished yet Amin.Adra 2024-09-17T07:18:49.105669Z Merged revision(s) 1360 from trunk: Merged revision(s) 1322 from trunk: [UPDATE] Standard Sequence ........ Amin.Adra 2024-09-17T07:06:52.597577Z [UPDATE] MES Data Patrik.Tasch 2024-09-16T14:04:40.005192Z Merged revision(s) 1383 from beta/UF.510.001-BETA: [BUGFIX] Put Valve type of oil heating valve to heating fix page ........ Patrik.Tasch 2024-09-16T12:21:55.578744Z Merged revision(s) 1380 from beta/UF.510.001-BETA: Merged revision(s) 1378 from trunk: [UPDATE] Put Valve type of oil heating valve to heating fix page ........ ........ Richard.Wagner 2024-09-16T10:56:28.419141Z [UPDATE] wjDrive - not finished yet Richard.Wagner 2024-09-16T09:02:11.607310Z [UPDATE] wjDrive - not finished yet Felix.Neunkirchner 2024-09-13T02:40:37.637440Z Merged revision(s) 1364 from beta/UF.510.001-BETA: [BUGFIX] influxDB - fix wrong unit, not wrong variable connection, tiebar position ........ Felix.Neunkirchner 2024-09-13T02:39:57.448055Z Merged revision(s) 1362 from beta/UF.510.001-BETA: [UPDATE] limitation of injection profile position with plastification position ........ Felix.Neunkirchner 2024-09-13T02:38:34.254763Z Merged revision(s) 1358 from beta/UF.510.001-BETA: [BUGFIX] InfluxDB - fixed tiebar postition always 0 (use As variable instead of AsFloat) + only record data in automatic mode ........ Sanghoon.Kim 2024-09-12T17:51:48.308604Z [ADD] add inj_econ - unified electric injection controller Richard.Wagner 2024-09-12T13:14:16.092501Z [BRANCH] Beta Richard.Wagner 2024-09-12T05:08:29.358107Z [UPDATE] rename Richard.Wagner 2024-09-12T03:56:33.179041Z [UPDATE] misc Richard.Wagner 2024-09-11T13:18:29.694701Z [UPDATE] merge conflicts Richard.Wagner 2024-09-11T13:08:31.094128Z Merged revision(s) 1346 from branches/UF1.0.0TEA5: [UPDATE] Changed defines for Drive Selection and added define for DriveType S_DRIVE_BuR (0) ........ Merged revision(s) 1345 from branches/UF1.0.0TEA5: [UPDATE] Bugfix for Loadcell Injection ........ Richard.Wagner 2024-09-11T12:48:57.936966Z [BRANCH] UF.510.02-Beta Albin.Kroell 2024-09-06T02:52:10.679252Z [UPDATE] Added Testtraces for HoldOnPressure with Highest Speed according to Specification of TE220 Albin.Kroell 2024-09-05T14:01:49.338817Z [UPDATE] bugfixes in ip_econ, added experimental precontrol value for backpressure Albin.Kroell 2024-09-05T14:00:03.196219Z [UPDATE] Test Data according to TEA5 Notebook Albin.Kroell 2024-09-05T08:14:04.375609Z [UPDATE] Problematic Backpressure Control Albin.Kroell 2024-09-04T12:13:12.274311Z [UPDATE] VisuBugfixes, Bugfix in ip_econ for decompression Albin.Kroell 2024-09-04T06:09:10.961510Z [UPDATE] max value pressor sensor added in IP_FIX and bugfix in ip_econ with PID holdon pressure Richard.Wagner 2024-09-03T09:29:31.722927Z [REVERT] Rev 1296 Albin.Kroell 2024-09-03T04:20:35.918381Z [UPDATE] Move CU out of DangerZone when Opening Door, EMStop or manually switch of Motors Albin.Kroell 2024-09-02T10:52:11.255780Z [ADD] Folder for Traces according to TestTickets in TEA5KEB/KEBA Note in Monday.com Albin.Kroell 2024-09-02T07:11:50.744426Z [UPDATE] Bugfix Injection Timeout without SOV Albin.Kroell 2024-09-02T04:45:25.519123Z [UPDATE] PL LoadCellAutozeroing Working, before Charging, Timeout for InjectionMovement when no SOV-COndition set. Bugfix Velocity 0 when no SOV-Condition. Bugifx in valuecheck in axisInitUp for PT1-Filter Moritz.Wurian 2024-08-30T12:28:05.486453Z [UPDATE] SDO Commands reset & homing Moritz.Wurian 2024-08-30T11:58:11.236152Z [REPORT] bug with MMI_DATA.DatCpy.SQCMoldRdy, temporary if to prevent plc service mode Moritz.Wurian 2024-08-30T11:56:53.108267Z [UPDATE] change define of WJAUT_NR_CHAINS to 11 from 10 Albin.Kroell 2024-08-30T08:53:49.922146Z [UPDATE] Backpressure and Injection reworked. ATTENTION kp now negative and both u_limits need to be set (more than zero); Error message for carriage sensor reworked and added option for machinetype TEA5; Autozeroing for Load Cell still not working Moritz.Wurian 2024-08-28T10:30:28.762663Z [UPDATE] Machine Hall config Albin.Kroell 2024-08-28T08:06:23.876028Z [UPDATE] Bugfix for PL Speed Albin.Kroell 2024-08-28T06:58:37.282731Z [UPDATE] Reset LoadCell and TiebarSensor Albin.Kroell 2024-08-28T04:11:57.269674Z [UPDATE] Bugfix KEB Servo Page (merge bugfix) Albin.Kroell 2024-08-28T01:01:03.384160Z [UPDATE] tiebar sensor reset, revert of pgen, change of iomap because of defective ai channel Moritz.Wurian 2024-08-27T15:55:38.677147Z [UPDATE] Safety Gate was inverted, updated simulation Moritz.Wurian 2024-08-26T12:17:31.797195Z [UPDATE] Extern start button edepos replaced Albin.Kroell 2024-08-26T09:17:52.601116Z [UPDATE] iomap fixed Albin.Kroell 2024-08-26T08:39:27.916971Z [UPDATE] Config for TEA5 KEBA was missing after merge LeeDongHo 2024-08-26T08:16:17.964041Z [ADD]Add TE220A5 keba config Albin.Kroell 2024-08-23T10:15:43.213970Z [UPDATE] Fixed Compiler Error undefined wjgear reference Albin.Kroell 2024-08-23T10:01:54.104644Z [UPDATE] deleted old wjgear (compiler error) Albin.Kroell 2024-08-22T13:07:23.395003Z [UPDATE] Merge Bugfix carriage speed Albin.Kroell 2024-08-20T13:43:38.695213Z [UPDATE] Bugfix motor.c for KEBA multiax Albin.Kroell 2024-08-19T16:20:31.010414Z [UPDATE] HMI Bugfix Albin.Kroell 2024-08-19T14:31:57.098855Z [UPDATE] Bugfixes in HMI after Merge from UF Beta --> Intermediate commit for PC in machine hall Albin.Kroell 2024-08-14T14:05:12.441091Z [UPDATE] Compiles after merge with TEA5 branch, machine starts up into visu but minor issues still avoid normal operation. Sim Config for KEB still missing Albin.Kroell 2024-08-14T11:20:03.996405Z [UPDATE] not working. Intermediate to work in office Sanghoon.Kim 2024-08-13T15:51:57.554823Z Merged revision(s) 1224 from beta/Tag1Beta: [UPDATE] separation of minimum pressure controller standstill and other movement parameter. ........ Albin.Kroell 2024-08-13T15:00:19.308935Z [UPDATE] merge Albin.Kroell 2024-08-13T12:35:18.482614Z [UPDATE] datashare commit Moritz.Wurian 2024-08-13T09:46:17.793117Z [UPDATE] added TEA5_Halle config Moritz.Wurian 2024-08-12T14:40:47.498599Z [UPDATE] merge interim commit Moritz.Wurian 2024-08-12T13:22:40.874927Z [UPDATE] continue with merge Moritz.Wurian 2024-08-08T14:12:13.225289Z [UPDATE] interim commit merge beta and tea5 NOT FINISHED Moritz.Wurian 2024-08-08T12:29:53.548422Z [UPDATE] Merge Beta with TEA5 (interim commit) NOT FINISHED (not compiling) Sanghoon.Kim 2024-08-07T08:46:43.079877Z [ADD] Add branch of TEA5 Sanghoon.Kim 2024-08-05T15:45:02.564930Z <Merged>[BUGFIX] Opening safety gate also with a case of cycle end with alarm Sanghoon.Kim 2024-08-05T14:52:09.325036Z <Merged>[BUGFIX] problem of missing update of profile graph max position (Plasticizing) Moritz.Wurian 2024-08-01T08:35:56.965009Z <Merged>[UPDATE] added Disable Holding Pressure to Inj. onepage Patrik.Tasch 2024-07-31T09:19:29.232416Z <Merged>[UPDATE] delete auto adjust for stroke at Ejector Zeroing Joerg.Emmerling 2024-07-30T12:02:08.721196Z <Merged>Revision(en) 1158 von trunk zusammengeführt: [UPDATE] Overtemperature blocks injection #1530169076 ........ ChanghakYeo 2024-07-30T08:23:16.074198Z <Merged>[UPDATE] Change in maximum grease refueling time (Production Department request),Fixed low operating oil level bug , Fixed automatic door operation bug Patrik.Tasch 2024-07-29T13:26:01.857102Z <Merged>[UPDATE] correction of the ejector zero point #1551519678 Felix.Neunkirchner 2024-07-29T10:39:38.361762Z <Merged>[UPDATE] wjCheckBox style fix Patrik.Tasch 2024-07-29T10:36:46.129194Z <Merged>[UPDATE] Ignore Profile in Manual Mode (Carriage Unit) Felix.Neunkirchner 2024-07-29T10:18:44.949305Z <Merged>Merged revision(s) 1159 from trunk: [UPDATE] removed OpcUA logger errors ........ Felix.Neunkirchner 2024-07-26T08:07:43.109187Z <Merged>Merged revision(s) 1154 from trunk: [UPDATE] MQTT - sync time when connection is lost and restablished ........ Felix.Neunkirchner 2024-07-25T09:49:54.136272Z <Merged>[UPDATE] SS - core layout Felix.Neunkirchner 2024-07-25T09:38:39.767371Z <Merged>[UPDATE] SS - core popup layout Amin.Adra 2024-07-25T09:23:43.288562Z <Merged>[ADD] Steps for Core 6-10 in SS Amin.Adra 2024-07-25T08:56:37.490507Z <Merged>[ADD] Steps for Core 6-10 in SS Sanghoon.Kim 2024-07-24T15:12:54.072285Z <Merged>[BUGFIX] compile error on eventbinding Felix.Neunkirchner 2024-07-24T12:47:50.157443Z <Merged>[UPDATE] made checkbox only clickable on checkbox area; replaced all brease checkboxes with woojin wjCheckBox TaeHwanRow 2024-07-22T07:26:07.887448Z [UPDATE] ignore cycle start button if the safety gate is opened or safety module status is not ok. part2 TaeHwanRow 2024-07-22T06:49:03.409957Z [UPDATE] ignore cycle start button if the safety gate is opened or safety module status is not ok. TaeHwanRow 2024-07-22T06:22:51.013651Z [UPDATE] release motor restart trigger if motor is switched off TaeHwanRow 2024-07-22T06:18:43.951359Z [UPDATE] hide cycle start button if the safety gate is opened or safety module status is not ok. Felix.Neunkirchner 2024-07-19T12:25:42.752522Z <Merged>Merged revision(s) 1121 from trunk: [UPDATE] MQTT.c wrong comment ........ Felix.Neunkirchner 2024-07-19T12:18:24.394352Z <Merged>Merged revision(s) 1119 from trunk: [UPDATE] MQTT - ringbuffer added for all data (fast, slow, shotBased) ........ TaeHwanRow 2024-07-19T08:33:20.404327Z [ADD] add cycle init condition page TaeHwanRow 2024-07-19T08:32:38.184794Z [UPDATE] add minimum of the decompression end delay for smooth braking (only for DL) TaeHwanRow 2024-07-19T08:30:48.428407Z [UPDATE] Allow change zone enable also for user TaeHwanRow 2024-07-19T08:30:00.215960Z [BUGFIX] Opening of Safety door with one touch button TaeHwanRow 2024-07-19T05:27:08.387558Z [UPDATE] Display plasticizing timeout also smart seq. TaeHwanRow 2024-07-19T05:24:59.284564Z <Merged>[UPDATE] ignore ejector cycle init condition if ejector is disabled TaeHwanRow 2024-07-19T05:16:23.836999Z <Merged>[UPDATE] Fast sampling time only for position due to the performance issue on Samsung Amin.Adra 2024-07-18T14:36:20.571588Z <Merged>[BUGFIX] Update Overview SS Moritz.Wurian 2024-07-18T13:46:18.579509Z [UPDATE] Switchover condition: release stroke for pressure dependat Felix.Neunkirchner 2024-07-18T13:18:38.105246Z <Merged>Merged revision(s) 1102 from trunk: [UPDATE] SS - added disabled style for several step ........ Amin.Adra 2024-07-18T12:42:53.426712Z [BUGFIX] Add checkbox to dis/enable Steps: Ejector for/Back, Injection A & B, Plastisizing A & B Felix.Neunkirchner 2024-07-18T12:15:39.489149Z <Merged>Merged revision(s) 1099 from trunk/Logical/mappView: [UPDATE] SS - design for disabled steps ........ Felix.Neunkirchner 2024-07-18T12:00:16.662437Z <Merged>Merged revision(s) 1097 from trunk: [UPDATE] wjDynAut - digital 3 variable fixed bug ........ Felix.Neunkirchner 2024-07-18T11:39:23.573864Z <Merged>Merged revision(s) 958 from trunk: [UPDATE] added option for InfluxDB ........ Felix.Neunkirchner 2024-07-18T11:10:46.886539Z <Merged>Merged revision(s) 1093 from trunk: [UPDATE] wjDynAut - added digital variable 3 ........ Moritz.Wurian 2024-07-18T06:54:07.674131Z [REVERT] revert of the changes made in rev. 1080 Amin.Adra 2024-07-17T13:59:17.534575Z <Merged>[BUGFIX] Add checkbox to dis/enable subchains: Ejector, Injection, Plastisizing Amin.Adra 2024-07-17T11:44:29.491188Z [BUGFIX] (Undo)SS:ON -> Hide Shortcut for cycle analyzer Amin.Adra 2024-07-17T10:53:01.056533Z <Merged>[BUGFIX] core out speed and pressure switch Amin.Adra 2024-07-17T10:43:15.613983Z <Merged>[BUGFIX] SS:ON -> Hide Shortcut for cycle analyzer Moritz.Wurian 2024-07-17T09:44:00.327528Z [BUGFIX] ejector init disabled if ejector is disabled Amin.Adra 2024-07-17T09:31:04.551713Z <Merged>[BUGFIX] core speed and pressure switch Amin.Adra 2024-07-17T08:59:22.913519Z <Merged>[BUGFIX] core speed and pressure switch variables Felix.Neunkirchner 2024-07-17T08:38:01.185212Z Merged revision(s) 1075 from trunk: [BUGFIX] Motor startup status color ........ Amin.Adra 2024-07-17T08:33:10.260277Z [BUGFIX] core speed and pressure switch names Felix.Neunkirchner 2024-07-16T14:38:02.298459Z <Merged>[UPDATE] enable variables for InfluxDB config page Felix.Neunkirchner 2024-07-16T14:05:42.205301Z <Merged>[UPDATE] Cpu.per Felix.Neunkirchner 2024-07-16T13:55:12.707174Z <Merged>[UPDATE] REF_CON Felix.Neunkirchner 2024-07-16T13:46:14.534771Z <Merged>[UPDATE] MQTT + REF_CON up2date Felix.Neunkirchner 2024-07-16T13:28:59.311215Z <Merged>Merged revision(s) 1045 from trunk: [UPDATE] MQTT - option to enable/diabled each tracked variable - logic + content page and bindings ........ Felix.Neunkirchner 2024-07-16T13:22:43.277948Z <Merged>Merged revision(s) 1061 from trunk: [UPDATE] MQTT - ringbuffer increased to 10000 (100s) + minor improvements ........ Felix.Neunkirchner 2024-07-16T13:22:19.340857Z <Merged>Merged revision(s) 1057 from trunk: [UPDATE] InfluxDB config page - missing bindings ........ Felix.Neunkirchner 2024-07-16T13:21:38.100436Z <Merged>Merged revision(s) 1055 from trunk: [UPDATE] added InfluxDB config page to fixpages ........ Felix.Neunkirchner 2024-07-16T13:19:11.130054Z <Merged>Merged revision(s) 1051 from trunk: [UPDATE] MQTT - ringbuffer implementation ........ Bozidar.Tomic 2024-07-16T13:13:02.155967Z <Merged>[UPDATE] Small update for wired sensor TaeHwanRow 2024-07-16T13:07:52.206998Z <Merged>[BUGFIX] Motor status handling for Safety door with KEB drive Bozidar.Tomic 2024-07-16T12:50:43.585767Z <Merged>[UPDATE] Pressure sensor wired option TaeHwanRow 2024-07-16T07:22:47.099727Z <Merged>[BUGFIX] After the positive movement, the pump still remained to slave. It must be master mode after any movement. TaeHwanRow 2024-07-16T07:13:47.975859Z <Merged>[UPDATE] apply faster sampling rate for position and pressure in status bar TaeHwanRow 2024-07-16T04:58:37.708935Z <Merged>[UPDATE] Change Tn speed value unit settings Tn Tn_Speed ms to sec for KEB drive Felix.Neunkirchner 2024-07-15T10:26:10.957577Z <Merged>Merged revision(s) 1049 from trunk: [BUGFIX] fixed footer button reset problem ........ Felix.Neunkirchner 2024-07-15T09:03:03.742155Z <Merged>Merged revision(s) 1047 from trunk: [BUGFIX] fixed footer button reset problem ........ TaeHwanRow 2024-07-15T01:02:15.600469Z <Merged>[UPDATE]Added boost pressure deceleration / Weighing time manual display annotation processing Joerg.Emmerling 2024-07-11T13:39:31.182796Z <Merged>[BUGFIX] Corrected the cycle time calculation for status bar (Mario) Mario.Sarajlic 2024-07-11T11:19:31.924391Z <Merged>[BUGFIX] Cycle time and last cycle time fix for production control and statusbar Mario.Sarajlic 2024-07-11T06:41:03.781696Z <Merged>[BUGFIX] Ejector pressure uodated to show actual value TaeHwanRow 2024-07-11T00:51:11.316611Z <Merged>[BUGFIX] Annotated the weighing time (manual) screen display on the injection integrated injection page so that it is not visible. TaeHwanRow 2024-07-11T00:50:11.112541Z <Merged>[BUGFIX] Hot Runner output rate operation abnormality program correction Mario.Sarajlic 2024-07-10T06:11:27.447202Z <Merged>[BUGFIX] "Content not loaded" bug for status bar Felix.Neunkirchner 2024-07-09T14:48:54.260979Z <Merged>Merged revision(s) 1031 from trunk: [UPDATE] MQTT - added buffer to fast publish FUB ........ Patrik.Tasch 2024-07-09T13:58:48.134428Z <Merged>[BUGFIX] Max Value Clamp Locking Speed Patrik.Tasch 2024-07-09T12:36:26.043029Z <Merged>[BUGFIX] production per hour and Remaining Time Felix.Neunkirchner 2024-07-09T12:11:16.320846Z <Merged>Merged revision(s) 1024 from trunk: [UPDATE] added QR code for bug report teamdesk ........ Mario.Sarajlic 2024-07-09T06:36:34.959002Z <Merged>Merged revision(s) 1022 from trunk: [UPDATE] Sampling rate for fast changed from 200ms to 100ms to improve HMI speed Felix.Neunkirchner 2024-07-08T08:20:19.147214Z <Merged>Merged revision(s) 1019 from trunk: [UPDATE] MQTT - changed 10ms sampling to 20ms ........ TaeHwanRow 2024-07-05T09:18:06.998383Z <Merged>[BUGFIX] MQTT shot based data trigger fixed Felix.Neunkirchner 2024-07-04T14:42:57.020624Z <Merged>Merged revision(s) 1011 from trunk: [UPDATE] MQTT values - float instead of integer ........ Mario.Sarajlic 2024-07-03T12:10:35.684908Z <Merged>[BUGFIX] Envelope curve for quality graph fixed Joerg.Emmerling 2024-07-03T08:42:44.678384Z <Merged>[FIX] Updated samplingRate to fast for ejector graph Felix.Neunkirchner 2024-07-02T13:32:57.404216Z <Merged>Merged revision(s) 992 from trunk: [UPDATE] SS - added error messages ........ Felix.Neunkirchner 2024-07-02T11:35:03.173690Z <Merged>Merged revision(s) 988 from trunk: [UPDATE] SS - fixed dropdown size in overlays ........ Felix.Neunkirchner 2024-07-02T11:34:35.868113Z <Merged>[UPDATE] SS - fixed dropdown size in overlays Mario.Sarajlic 2024-07-02T11:08:11.256763Z <Merged>[BUGFIX] Color of core images in status bar - Merged revision(s) 985 from trunk: Felix.Neunkirchner 2024-07-02T10:00:26.776036Z <Merged>[UPDATE] OpcUA/OpcUaMap.uad Felix.Neunkirchner 2024-07-02T09:51:57.616039Z <Merged>Merged revision(s) 976 from trunk: [UPDATE] MQTT - changed sampling time and added exit statement ........ Felix.Neunkirchner 2024-07-02T09:51:17.709965Z <Merged>Merged revision(s) 972 from trunk: [UPDATE] missing quotes for strings ........ Felix.Neunkirchner 2024-07-02T09:50:48.278400Z <Merged>Merged revision(s) 971 from trunk: [UPDATE] MQTT - added error handling + code improvements ........ Felix.Neunkirchner 2024-07-02T09:50:19.394034Z <Merged>Merged revision(s) 970 from trunk: [UPDATE] changed IP address ........ Felix.Neunkirchner 2024-07-02T09:48:59.766960Z <Merged>Merged revision(s) 969 from trunk: [UPDATE] changed MQTT task to requirements of HQ ........ Sanghoon.Kim 2024-07-02T08:15:41.863221Z <Merged>[ADD] Add heater off in case of Zone break error Patrik.Tasch 2024-07-01T11:14:57.207162Z <Merged>[BUGFIX] Edit Mode Close Mario.Sarajlic 2024-06-28T07:24:17.075116Z <Merged>[BUGFIX] Barrel temperature +-5 button fix to avoid setting temperature outside of limits - Merged revision(s) 961 from trunk Felix.Neunkirchner 2024-06-26T14:17:30.639709Z <Merged>[UPDATE] put InfluxDB in higher task class so it can calculate sampling intervals. (Trunk Rev.1173) Felix.Neunkirchner 2024-06-26T14:14:38.978344Z <Merged>Merged revision(s) 953 from beta/UF1.0_Beta_Samsung: Merged revision(s) 948 from trunk: [UPDATE] InfluxDB - added 3 different IotMqttPublish FUBs to insert data into InfluxDB with different intervals ........ ........ Felix.Neunkirchner 2024-06-26T14:14:10.149586Z <Merged>Merged revision(s) 942 from beta/UF1.0_Beta_Samsung: Merged revision(s) 936 from trunk: [UPDATE] MQTT changed inserted values to the specific variables provided by HQ ........ ........ Felix.Neunkirchner 2024-06-26T14:13:34.580847Z <Merged>Merged revision(s) 928 from beta/UF1.0_Beta_Samsung: Merged revision(s) 884 from trunk: [UPDATE][ADD] added task to communicate with InfluxDB via MQTT + HTTPS for time sync ........ ........ Felix.Neunkirchner 2024-06-26T10:58:22.216884Z <Merged>Merged revision(s) 951 from trunk: [UPDATE] changed export function of csv to directly save in folder ........ Mario.Sarajlic 2024-06-26T10:17:04.972075Z <Merged>[BUGFIX] Startpage SPC overview update interval fixed Felix.Neunkirchner 2024-06-25T13:11:27.578380Z <Merged>Merged revision(s) 945 from trunk: [BUGFIX] fixed wjSPC statistics not working ........ Mario.Sarajlic 2024-06-24T13:49:40.926321Z [FIX] Wrong binding Mario.Sarajlic 2024-06-24T13:17:21.455673Z <Merged>[ADD] Performance improvements from trunk Mario.Sarajlic 2024-06-24T13:10:30.404862Z <Merged>[FIX] Wrong number on Mini SP4 Mario.Sarajlic 2024-06-24T13:07:36.666655Z <Merged>[ADD] Performance improvements from trunk Mario.Sarajlic 2024-06-24T12:57:28.478741Z <Merged>[ADD] Performance improvements from trunk Mario.Sarajlic 2024-06-24T09:25:03.604278Z <Merged>[UPDATE] Binding files moved to new folder structure Mario.Sarajlic 2024-06-24T08:53:52.684140Z <Merged>[ADD] Folder structure for reorganization of binding pages Mario.Sarajlic 2024-06-24T08:31:02.947495Z <Merged>[UPDATE] Content files moved to new folder structure Mario.Sarajlic 2024-06-24T08:08:45.191422Z <Merged>[ADD] Folder structure for reorganization of content pages Sanghoon.Kim 2024-06-19T12:36:18.447258Z <Merged>[UPDATE] Add Injection B on MESdata........Merged revision(s) 741 from trunk: (by Amin) Mario.Sarajlic 2024-06-19T10:08:32.856739Z <Merged>[FIX] Improved images for MH mode and Carriage Zeroing - Merged revision(s) 921 from trunk Patrik.Tasch 2024-06-19T07:19:47.416366Z <Merged>[UPDATE] Core Interlock Patrik.Tasch 2024-06-14T09:54:19.555198Z <Merged>[BUGFIX] Core Interlock Patrik.Tasch 2024-06-14T07:34:02.129510Z <Merged>[BUGFIX] Core Settings Copy Patrik.Tasch 2024-06-04T08:43:48.483239Z <Merged>Merged revision(s) 854 from trunk: [BUGFIX] Woojin Ladder ........ Patrik.Tasch 2024-05-31T08:37:47.306471Z <Merged>[UPDATE] Initial setting for MoveMode Core Sanghoon.Kim 2024-05-29T13:38:40.161720Z <Merged>[BUGFIX] Grease Lubrication Level alarm Sanghoon.Kim 2024-05-29T10:56:35.981973Z <Merged>[BUGFIX] Steam injection with smart sequence Sanghoon.Kim 2024-05-28T16:33:54.450870Z <Merged>[BUGFIX] Wrong End Position Status condition for Clamp. Sanghoon.Kim 2024-05-28T15:18:16.223848Z <Merged>[UPDATE] When activate the mold height mode, change mode to setting mode for safe movement. Sanghoon.Kim 2024-05-28T13:04:08.526427Z <Merged>[UPDATE] increase button distance on cascade page Patrik.Tasch 2024-05-28T13:01:24.742511Z <Merged>Merged revision(s) 728 from trunk: [UPDATE] Posibility to disable Core in SS ........ Patrik.Tasch 2024-05-28T11:13:01.887014Z <Merged>Merged revision(s) 820 from trunk: [BUGFIX] Spec Values Injection ........ Amin.Adra 2024-05-28T06:44:10.781322Z <Merged>Merged revision(s) 811-816 from trunk: [BUGFIX] Stop injection chain with split injection (Manual & Automatic) Sanghoon.Kim 2024-05-27T12:57:47.355469Z <Merged>[BUGFIX] to enable ejector,core in case of forced oil cooling with pump2 Mario.Sarajlic 2024-05-27T10:56:29.475033Z <Merged> [UPDATE] Show dedicated image for calibration mode Amin.Adra 2024-05-27T09:20:04.658567Z <Merged> Merged revision(s) 777-781-792-799-801 from trunk: [UPDATE] Cascade for split injection Patrik.Tasch 2024-05-24T10:13:57.849796Z <Merged>[UPDATE] Set Minimum Position for Clamping force for MH adjustment Mario.Sarajlic 2024-05-24T08:32:47.913362Z <Merged>[BUGFIX] Language selector fix for text overflow Patrik.Tasch 2024-05-24T08:26:55.853167Z <Merged>[BUGFIX] Oil Preheat Mario.Sarajlic 2024-05-23T11:09:55.656573Z <Merged>[ADD] QR help system for reporting a bug ticket directly from Visu Patrik.Tasch 2024-05-23T10:40:16.710196Z <Merged>[BUGFIX] Safety Door Closing Felix.Neunkirchner 2024-05-23T08:51:28.825360Z <Merged>Merged revision(s) 783 from trunk/Logical/mappView/Widgets: [BUGFIX] wjTrendGraph negativ values not shown fixed ........ Felix.Neunkirchner 2024-05-23T08:05:40.402603Z <Merged>Merged revision(s) 779 from trunk: [BUGFIX] wjIntegralGraph - fixed graphical overflow problem ........ Sanghoon.Kim 2024-05-22T15:39:06.726357Z <Merged>[BUGFIX] clamp pressure display Felix.Neunkirchner 2024-05-22T14:41:26.402390Z <Merged>Merged revision(s) 773 from trunk: [UPDATE] SS - core dialog layout ........ Felix.Neunkirchner 2024-05-22T14:15:28.665103Z <Merged>Merged revision(s) 770 from trunk: [BUGFIX] wjPushButton - datChange was not working when confirm dialog is used ........ Felix.Neunkirchner 2024-05-22T13:04:24.374884Z <Merged>Merged revision(s) 768 from trunk: [UPDATE] added .tmx file for IO page ........ Patrik.Tasch 2024-05-22T12:15:13.315902Z <Merged>[UPDATE] Stop Condition for MH Adjustment DL; Show CtrStep in Visu (Service) Patrik.Tasch 2024-05-22T09:05:55.928593Z <Merged>[BUGFIX] Engineering Unit Patrik.Tasch 2024-05-22T07:33:23.413312Z <Merged>[BUGFIX] Stop conditions for MH Adjustment Mario.Sarajlic 2024-05-22T06:34:47.875865Z <Merged>[ADD] Added stop button for stopping process movements, like Automatic MH in this case Mario.Sarajlic 2024-05-21T08:18:09.735128Z <Merged>[FIX] Dialog size fixed to match Trunk Mario.Sarajlic 2024-05-21T07:45:57.398665Z <Merged>[UPDATE] Changed the QR code link Sanghoon.Kim 2024-05-17T12:29:45.839980Z <Merged>[BUGFIX] Core pressure release button not shown in smart seq. Sanghoon.Kim 2024-05-17T11:52:58.843664Z <Merged>[BUGFIX] Wrong Pump speed for Split injection Patrik.Tasch 2024-05-16T10:25:20.632753Z <Merged>Merged revision(s) 739 from trunk: [UPDATE] Injection Core Interlock; Manual Calculation of Core Interlock ........ Mario.Sarajlic 2024-05-14T12:43:19.565539Z <Merged>[FIX] Position of widgets on Mold page adjusted to follow design guidelines Mario.Sarajlic 2024-05-13T07:21:10.384965Z <Merged> [BUGFIX] Added Speed club QR to the help dialog ..Trunk 312 Sanghoon.Kim 2024-05-10T11:00:33.285778Z <Merged>[UPDATE] improvement of for loop to avoid memory leak (S_MAX_NO_CORES, MAX_NO_PUMPS) Patrik.Tasch 2024-05-08T09:34:59.102335Z <Merged>[BUGFIX] Core 3 Movement Patrik.Tasch 2024-05-08T08:59:33.210155Z <Merged>[BUGFIX] Memory Leakuge on Envelope Curve Sanghoon.Kim 2024-05-07T15:04:57.044597Z <Merged>[BUGFIX] bugfix of Backpressure in manual mode Patrik.Tasch 2024-05-07T13:22:37.359250Z <Merged>[BUGFIX] Visibility of Greasing Sanghoon.Kim 2024-05-06T09:44:45.205976Z <Merged>[UPDATE] Add Global_Define.var to avoid memory leak mistake Sanghoon.Kim 2024-05-06T07:55:34.819826Z <NoNeedMerge>[ADD] Add configuration FLEX_CONFIG_SAMSUNG_2K for test purpose (Not completed yet)..No need to merge to trunk Sanghoon.Kim 2024-05-03T10:47:37.219082Z <Merged>[BUGFIX] bugfix on Core pressure release button. Patrik.Tasch 2024-05-02T12:34:23.902314Z <Merged>[BUGFIX] Optional Page, TextInput..Merged from trunk Sanghoon.Kim 2024-05-02T07:23:46.227054Z <Merged>[UPDATE] update more Korean translation...Merged to trunk Felix.Neunkirchner 2024-04-30T13:12:07.116352Z [UPDATE] compiled wjSet.scss to .sass.css...Merged from trunk Sanghoon.Kim 2024-04-30T11:44:49.462295Z <Merged>[BUGFIX] fix wrong master axis connection..Merged to trunk Sanghoon.Kim 2024-04-30T08:55:58.815160Z <Merged>[BUGFIX] fix merging valve for Pump1,2,3,4...Merged to trunk Mario.Sarajlic 2024-04-30T08:31:22.005784Z <Merged>[BUGFIX] Binding for Footer Edit mode button reverted to TwoWay .. Amin.Adra 2024-04-29T15:03:39.947738Z <Merged>[UPDATE] Increase number of cascade valves 96...Merged revision(s) 673 from trunk: Sanghoon.Kim 2024-04-26T12:53:06.869273Z <Merged>[UPDATE] change lubrication variables to array...Merged to trunk Sanghoon.Kim 2024-04-26T12:50:11.359367Z <Merged>[BUGFIX] fix wrong mold protection condition Ap to ApLock (DLA5) Part2... Sanghoon.Kim 2024-04-26T07:17:05.131436Z <Merged>[BUGFIX] fix wrong mold protection condition Ap to ApLock (DLA5) ........Merged revision(s) 655 from trunk: Patrik.Tasch 2024-04-25T13:01:42.671721Z [BUGFIX] Motor Switch on...Merge?????? Mario.Sarajlic 2024-04-25T10:36:35.045710Z <Merged>[UPDATE] Merged revision(s) 647 from trunk: Weight control changes Mario.Sarajlic 2024-04-25T10:36:08.443936Z <Merged>[UPDATE] Merged revision(s) 647 from trunk: Weight control changes Patrik.Tasch 2024-04-25T08:50:42.931990Z <Merged>Merged revision(s) 644 from trunk: [UPDATE] 4 Tiebar Sensors Samsung Request ........ Richard.Wagner 2024-04-23T09:31:44.867913Z <Merged>[UPDATE] TH2K KEB Rotary Improvements regarding communication...Merged to trunk Felix.Neunkirchner 2024-04-22T12:13:17.633587Z <Merged>Merged revision(s) 631 from trunk: [UPDATE] wjFlexIO added spinner to check the loading process ........ Richard.Wagner 2024-04-22T04:26:16.541042Z [BUGFIX] 2K critical smart sequencer update...Merge???? Richard.Wagner 2024-04-22T02:27:32.051981Z [UPDATE] InHouse Exhibition / PlaimmX Changes on Site...Merge???? TaeHwanRow 2024-04-22T01:40:01.015205Z [BUGFIX] Visibility on the turntable page based on machine type (TOC or VH)....Merge???? ChanghakYeo 2024-04-22T01:09:14.423462Z <Merged>[UPDATE] Sanghoon changes TaeHwanRow 2024-04-22T00:46:01.116696Z [BUGFIX] Visibility on the turntable page based on machine type (TOC or VH)...Merge???? TaeHwanRow 2024-04-21T23:47:45.271484Z [BUGFIX] Visibility on the turntable page based on machine type (TOC or VH)....Merge???? Amin.Adra 2024-04-19T09:46:59.003401Z <Merged>Merged revision(s) 623 from trunk: [UPDATE] Injection differential speed Amin.Adra 2024-04-19T07:41:53.304773Z <Merged>[BUGFIX] SPC ShotVolume...Merged from trunk Sanghoon.Kim 2024-04-18T15:12:46.122290Z <Merged>[UPDATE] display master axis number for hydraulic pump...Merged to trunk Sanghoon.Kim 2024-04-18T15:11:08.407470Z <Merged>[UPDATE] Remove old MH software...Merged to trunk Sanghoon.Kim 2024-04-18T10:59:43.793682Z <Merged>[BUGFIX] wrong unit for ACT_DATA.Clamp.MaxClampingForce ...Merged to trunk Sanghoon.Kim 2024-04-18T10:33:05.917095Z <Merged>[BUGFIX] wrong index for hide page Mold2...Merged to trunk Felix.Neunkirchner 2024-04-17T13:38:07.943270Z <Merged>Merged revision(s) 610 from trunk: [BUGFIX] added native name to each language; fixed swapped languages th <-> vi ........ Amin.Adra 2024-04-17T13:04:01.675692Z <Merged>Merged revision(s) 585+606 from trunk: [UPDATE] SPC General Optimization + (Re)add TIEBAR Group TaeHwanRow 2024-04-17T10:41:21.368434Z <Merged>[UPDATE] Change flex configuration hardware settings 606 TaeHwanRow 2024-04-17T10:30:18.773035Z <Merged>[UPDATE] Activate the Superform option program 605 Sanghoon.Kim 2024-04-17T09:37:57.853194Z <Merged>[BUGFIX] bugfix of pump selection of PL-B....Merged to Trunk 604 Sanghoon.Kim 2024-04-16T16:45:52.916772Z <Merged>[UPDATE] update for page menu texts and hide...Merged to Trunk 597 Moritz.Wurian 2024-04-16T15:51:51.672828Z <Merged>[UPDATE] IP settings adjusted....Merged to Trunk 600 Moritz.Wurian 2024-04-16T15:10:44.743724Z <Merged>[UPDATE] adjusted option 01A500 and 01A550 for inj A & B....Merged to Trunk 599 Sanghoon.Kim 2024-04-16T15:01:14.671120Z <Merged>[UPDATE] SPC Trigger...Merged revision(s) 559,557,555 by Amin from trunk: Sanghoon.Kim 2024-04-16T14:04:42.923658Z <Merged>[UPDATE] deactivate the StepMonitor to improve performance (activate when it is necessary to use)........Merged revision(s) 591 to trunk Sanghoon.Kim 2024-04-16T12:49:14.756502Z <Merged>[BUGFIX] bugfix of Plast B actual data........Merged revision(s) 590 to trunk Sanghoon.Kim 2024-04-16T12:48:30.353499Z <Merged>[UPDATE] Add timer for KEB rotary status timer 3 sec........Merged revision(s) 589 to trunk Sanghoon.Kim 2024-04-16T12:37:16.375447Z <Merged>[BUGFIX] bugfix for TOC lockpin ........Merged revision(s) 588 to trunk Felix.Neunkirchner 2024-04-16T11:54:10.976973Z <Merged>Merged revision(s) 578 from trunk: [BUGFIX] wjPageMenu multiple active pages bugfix ........ Sanghoon.Kim 2024-04-16T11:35:32.308072Z <Merged>[BUGFIX] rotary & lockpin button........Merged revision(s) 586 to trunk Sanghoon.Kim 2024-04-16T11:08:11.672330Z <Merged>[UPDATE] update of rotary,clamp,lockpin interlock........Merged revision(s) 584 to trunk Felix.Neunkirchner 2024-04-16T09:10:50.596250Z [UPDATE] updates .tmx files Patrik.Tasch 2024-04-16T08:59:37.846340Z [BUGFIX] Delete all Sequence....Merge???? Felix.Neunkirchner 2024-04-16T08:26:54.498222Z <Merged>Merged revision(s) 545 from trunk: [BUGFIX] Initup for service password moved to cyclic to prevent 0000 password bug ........ Felix.Neunkirchner 2024-04-16T08:26:31.310413Z <Merged>Merged revision(s) 544 from trunk: [BUGFIX] Initup for service password moved to cyclic to prevent 0000 password bug ........ Felix.Neunkirchner 2024-04-16T08:25:56.125449Z <Merged>Merged revision(s) 539 from trunk: [BUGFIX] Initup for service password moved to cyclic to prevent 0000 password bug ........ Felix.Neunkirchner 2024-04-16T08:25:23.431565Z <Merged>Merged revision(s) 496 from trunk: [UPDATE] Small updates for PIN system ........ Felix.Neunkirchner 2024-04-16T08:24:46.520189Z <Merged>Merged revision(s) 495 from trunk: [UPDATE] Removed unused user roles (God, ReciepeManagement) and moved UserHandling from 16ms to 2ms taskclass ........ Felix.Neunkirchner 2024-04-16T08:22:42.547595Z <Merged>Merged revision(s) 490 from trunk: [UPDATE] Redesigned user creation to match the PIN login style ........ Felix.Neunkirchner 2024-04-16T08:21:45.886567Z <Merged>Merged revision(s) 479 from trunk: [UPDATE] Small updates for PIN system ........ Felix.Neunkirchner 2024-04-16T08:21:15.859988Z <Merged>Merged revision(s) 478 from trunk: [UPDATE] Images for logged in users updated - only 3 possibilities now ........ Felix.Neunkirchner 2024-04-16T08:20:28.242876Z <Merged>Merged revision(s) 476 from trunk: [UPDATE] Made the login userlist dynamic, so that custom users are also shown when created ........ Felix.Neunkirchner 2024-04-16T08:19:51.140259Z <Merged>Merged revision(s) 471 from trunk: [UPDATE] Small updates for PIN system ........ Felix.Neunkirchner 2024-04-16T08:17:55.707154Z <Merged>Merged revision(s) 469 from trunk: [UPDATE] Login system change to PIN login ........ Patrik.Tasch 2024-04-16T07:42:09.758597Z [BUGFIX] Compiler Error Patrik.Tasch 2024-04-16T07:37:13.433244Z [UPDATE] SPC Dropdownlist for 4 Tiebar Sensor, Simulate Clamping force....Merge???? Sanghoon.Kim 2024-04-15T12:52:27.246931Z <Merged>[UPDATE] tiebar pump selection from GEN to POS,NEG ........Merged revision(s) 554 from trunk: Patrik.Tasch 2024-04-15T11:03:20.085592Z <Merged>[UPDATE] Automatic MH correction........Merged revision(s) 560 to trunk Patrik.Tasch 2024-04-15T08:07:31.650649Z [BUGFIX] Clamp Close Stop condition....Merge???? Patrik.Tasch 2024-04-12T09:39:35.436270Z [UPDATE] Visibility of Halfnut Tiebar Page....Merge???? Amin.Adra 2024-04-12T08:19:57.713920Z <Merged>[UPDATE] SPC Trigger...Merged revision(s) 541 from trunk: Patrik.Tasch 2024-04-12T07:46:15.836970Z [UPDATE] MH Compensation (initial Version, not finished) Felix.Neunkirchner 2024-04-12T07:27:22.414719Z <Merged>[UPDATE] adjusted sampling rate timers....Merged to Trunk Felix.Neunkirchner 2024-04-12T07:24:51.886548Z [UPDATE] changed twoWay bindings to oneWay if not needed; removed sampingRate fast Mario.Sarajlic 2024-04-12T06:43:41.619714Z <Merged>[UPDATE] Merged revision(s) 530 from trunk: Sanghoon.Kim 2024-04-11T15:26:03.521879Z <Merged>[BUGFIX] bugfix of increase production counter by 2....Merged to Trunk Sanghoon.Kim 2024-04-11T15:24:54.611279Z <Merged>[UPDATE] improve initialization of temperature zones....Merged to Trunk 533 Patrik.Tasch 2024-04-11T14:09:04.178636Z <Merged>[UPDATE] Greasing Options with and without Sensor....Merge???? Patrik.Tasch 2024-04-11T08:13:59.102418Z <Merged>[UPDATE] Put Weight Control Integral to Injection Integral Page....Merged to Trunk 527 Patrik.Tasch 2024-04-11T07:45:29.106522Z <Merged>[UPDATE] Motor switch back on in Semi auto with Door close....Merged from Trunk Patrik.Tasch 2024-04-11T07:23:38.123835Z [UPDATE] default value for Max Pressure Zero tonnage Point....Merge???? Sanghoon.Kim 2024-04-10T17:35:58.495283Z <Merged>[UPDATE] hide unnecessary tab....Merged to Trunk 517 Sanghoon.Kim 2024-04-10T16:40:42.404873Z <Merged>[FIX] Min/Max values for carriage page adjusted for pointer operation....Merged to Trunk 515 Sanghoon.Kim 2024-04-10T16:04:23.845734Z Merged revision(s) <Merged>511/510/509/508/506/503/500/498 from trunk: [FIX] Min/Max values for one-page injection adjusted for pointer operation ........ Patrik.Tasch 2024-04-10T12:55:17.091896Z [BUGFIX] remove IStop for TH Clamp movement....Merge???? Amin.Adra 2024-04-10T12:16:47.013061Z <Merged>Merged revision(s) 502 from trunk:[BUGFIX] Temperature BrokenSensorMode Patrik.Tasch 2024-04-10T09:44:03.215032Z [UPDATE] Put back inputs for MH Puls for MH position calculation....Merge???? Amin.Adra 2024-04-09T12:12:01.093150Z <Merged>Merged revision(s) 491 from trunk: [UPDATE] Hide ActTemp Barrel IF BrokenSensorMode is Activated Patrik.Tasch 2024-04-09T11:24:51.602039Z <Merged>[UPDATE] Automatic MH adjustment without Sensor....Merged to Trunk 521 Amin.Adra 2024-04-09T09:34:08.906041Z <Merged>Merged revision(s) 486 from trunk: [UPDATE] Hide ActTemp Barrel IF BrokenSensorMode is Activated Patrik.Tasch 2024-04-09T06:46:53.099189Z [BUGFIX] Compiler Error Patrik.Tasch 2024-04-09T06:22:16.916965Z [UPDATE] TH Auto MH adjustment....Merge???? Moritz.Wurian 2024-04-08T12:20:56.672531Z <Merged>[UPDATE] IP settings adjusted....Merged to Trunk 482 Patrik.Tasch 2024-04-08T10:23:24.818125Z [UPDATE] 4 Tiebar Sensors ....Merge???? Felix.Neunkirchner 2024-04-05T10:38:07.232595Z <Merged>Merged revision(s) 470 from trunk: [BUGFIX] FLEX_CONFIG tolerance settings wrong ........ Patrik.Tasch 2024-04-05T08:50:53.776450Z [UPDATE] Hide Rotary Drive Page if not active....Merge???? Amin.Adra 2024-04-05T07:08:48.236807Z <Merged>Merged revision(s) 464 from trunk: [UPDATE] SPC: Mold Force [N] to [KN] ........ Patrik.Tasch 2024-04-04T13:34:10.394013Z [UPDATE] TH Rotary ....Merge???? Amin.Adra 2024-04-04T13:07:20.668016Z <Merged>Merged revision(s) 460 from trunk: [UPDATE] SPC Mold Protection Time ........ Amin.Adra 2024-04-04T12:31:04.437954Z <Merged>Merged revision(s) 421, 436, 438, 440, 445, 450, 454, 457, 458 from trunk: [UPDATE] Quality Table Sanghoon.Kim 2024-04-04T07:32:57.050720Z <Merged>[UPDATE] Injection2 for TH (Actually vertical injection)....Merged to Trunk 598 Patrik.Tasch 2024-04-04T07:13:43.741334Z <Merged>Merged revision(s) 453 from trunk: [UPDATE] Motor Switch ON in Semi Auto ........ Sanghoon.Kim 2024-03-29T11:27:10.813840Z <Merged>[ADD] Clamp Force Test Process on THA5 ........Merged revision(s) 446 from trunk: Sanghoon.Kim 2024-03-28T14:43:47.146164Z <Merged>[BUGFIX] bugfix on Flash monitoring due to the changing tonnage unit kN to N ........Merged revision(s) 441 from trunk: Moritz.Wurian 2024-03-28T08:36:36.747122Z <Merged>[UPDATE] alarm settings page adjusted....Merged to Trunk 481 Patrik.Tasch 2024-03-27T15:45:43.331787Z [UPDATE] Automatic MH adjustment....Merge???? Patrik.Tasch 2024-03-27T10:53:04.077108Z <Merged>[UPDATE] Motor Switch ON in Semi Auto....Merged to Trunk 453 Patrik.Tasch 2024-03-27T10:52:38.421387Z [BUGFIX] AntiFlash....Merge???? Patrik.Tasch 2024-03-27T09:31:01.876024Z [MERGE] AUTO MH TH....Merge???? Patrik.Tasch 2024-03-27T06:46:54.352714Z <Merged>[MERGE] AntiFlash and WeightControl...Merged from Trunk Sanghoon.Kim 2024-03-25T14:57:41.047903Z <Merged>[UPDATE] improve simulation on TH ........Merged revision(s) 414 from trunk: Sanghoon.Kim 2024-03-25T14:51:04.419485Z <Merged>[UPDATE] change task class time based on 400us for B&R drive. ........Merged revision(s) 411 from trunk: Sanghoon.Kim 2024-03-25T11:14:11.684796Z [UPDATE] remove Ap_spec, ApLock_ton from AXdat, Should be used with ACT_DATA ........Merged revision(s) 408 from trunk: Sanghoon.Kim 2024-03-22T13:29:42.875196Z [UPDATE] Unified tonnage unit also to old automatic moldheight, upgrade old automatic moldheight as TE Tag6 latest version. (as a temporary solution of new automatic moldheight) Sanghoon.Kim 2024-03-22T10:20:39.925689Z [BUGFIX] Unify the clamp force for all the machine types. (separation of moving force (Ap), clamping ForceProfilePos(ApLock))........Merged revision(s) 403 to trunk Sanghoon.Kim 2024-03-18T15:48:42.872842Z [UPDATE] change location of Cycle init condition page (not visible for static chain) Moritz.Wurian 2024-03-04T10:43:21.659976Z <Merged>[UPDATE] hide flashing without smart light activated........Merged revision(s) 413 to trunk Felix.Neunkirchner 2024-02-27T14:10:29.772954Z [UPDATE] removed historizing on OpcUA variables ........Merged revision(s) 418 to trunk Sanghoon.Kim 2024-02-20T16:25:27.216500Z [UPDATE] Ignore Max Temp alarm in the broken sensor mode ........Merged revision(s) 289 from trunk: Sanghoon.Kim 2024-02-19T11:24:02.344988Z [BUGFIX] add missing InitVProfNegValve on tog_con due to a tonnage buildup problem ........Merged revision(s) 282 from trunk: Bozidar.Tomic 2024-02-19T06:14:48.727327Z [BUGFIX] Added stroke calculation for envelope curve, fixed widget text and overflow ........Merged revision(s) 273 from trunk: Joerg.Emmerling 2024-02-15T13:44:11.627140Z [UPDATE] Envelope curve trigger ........Merged revision(s) 271 to trunk Felix.Neunkirchner 2024-02-15T10:34:26.684964Z [UPDATE] dataprovider fixed ........Merged revision(s) 269 to trunk Felix.Neunkirchner 2024-02-14T13:55:40.838130Z [UPDATE] FLEX_CONFIG improved cyclic time classes + OPCUA Settings ........Merged revision(s) 246 from trunk: Bozidar.Tomic 2024-02-14T12:43:48.796741Z [UPDATE] Envelope reset trigger,Envelope axis preset value ........Merged revision(s) 240, 244 from trunk: Felix.Neunkirchner 2024-02-14T12:37:07.178829Z [UPDATE] set file permisssions on linux on data refresh ........Merged revision(s) 239 from trunk: Felix.Neunkirchner 2024-02-14T12:36:32.256902Z [UPDATE] optimized cycle times and OPCUA settings for CP1686X_SIM + Simulation ........Merged revision(s) 232 from trunk: Felix.Neunkirchner 2024-02-14T12:35:35.584891Z [UPDATE] wjPageMenu increased opening speed ........Merged revision(s) 207 from trunk: Bozidar.Tomic 2024-02-14T09:23:52.210376Z [UPDATE] Envelope curve and mold protection update ........Merged revision(s) 234 from trunk: Sanghoon.Kim 2024-02-13T18:21:30.162390Z [BUGFIX] The tonnage buildup speed was not applied due to the safe point. (TH).....Merged revision 236 to Trunk: Bozidar.Tomic 2024-02-12T15:45:13.270349Z [UPDATE] Purge process small updates ........Merged revision(s) 230 from trunk: Sanghoon.Kim 2024-02-12T11:50:47.484333Z [UPDATE] Revert wrong commit part from Rev.226 (Only on BetaTag.).....No Need to Merge to Trunk Sanghoon.Kim 2024-02-12T10:26:56.219628Z [UPDATE] Improve the function Oil Cooling with Pump (for TH).....Merged revision 227 to Trunk: Sanghoon.Kim 2024-02-09T11:50:05.453865Z [UPDATE] Improve CSTM_PAR, CSTM_FIX (remove unused variables).....Merged revision 222 to Trunk: Sanghoon.Kim 2024-02-09T09:58:56.545065Z [ADD] Add NC/NO selection for clamp emergency switch.....Merged revision 221 to Trunk: Moritz.Wurian 2024-02-09T09:29:16.010623Z <Merged>[UPDATE] checked and updated dropdownlists........Merged revision(s) 416 to trunk Moritz.Wurian 2024-02-09T09:04:35.968047Z <Merged>[UPDATE] hide 2nd oil temp setting........Merged revision(s) 417 to trunk Bozidar.Tomic 2024-02-09T08:15:44.807854Z [UPDATE] lubrication alarm, mold protection retries TH, ejector enable/disable SS ........Merged revision(s) 201 from trunk: Sanghoon.Kim 2024-02-08T16:18:39.956707Z [UPDATE] Update for Samsung customized light (only one light must be on at the same time) ........Merged revision(s) 212 from trunk: Sanghoon.Kim 2024-02-08T14:52:36.363263Z [BUGFIX] Wrong injection speed displayed for TH ........Merged revision(s) 209 from trunk: Sanghoon.Kim 2024-02-08T14:51:33.880576Z [BUGFIX] Heater group status was not changed to off in case a zone is error state ........Merged revision(s) 208 from trunk: Patrik.Tasch 2024-02-08T08:23:01.595498Z [UPDATE] Alarm default Settings.....Merged revision 205 to Trunk: Patrik.Tasch 2024-02-07T11:55:56.141496Z [BUGFIX] Split Injection.....Merged revision 203 to Trunk: Patrik.Tasch 2024-02-06T09:16:50.856144Z [UPDATE] Change Option Number for "Force KEB Output" Option.....Merged revision 225 to Trunk: Richard.Wagner 2024-02-06T06:08:08.378142Z [UPDATE] Disable Tonnage optimiziation ........Merged revision(s) 197 from branches/TEA5_KEB: TaeHwanRow 2024-02-02T14:27:47.627785Z <Merged>[UPDATE] Restart motor after safety gate closed again.....Merged revision 223 to Trunk: Sanghoon.Kim 2024-02-02T11:44:12.621468Z [UPDATE] Error handling of safety gate for B&R motor (implement same as old Tag).....Merged revision 223 to Trunk: Bozidar.Tomic 2024-02-02T11:24:40.767070Z [FIX] Lubrication option alarm fix ........Merged revision(s) 192 from trunk: Bozidar.Tomic 2024-02-02T11:00:53.745095Z [UPDATE] Purge visu ........Merged revision(s) 190 from trunk: Patrik.Tasch 2024-02-02T10:01:11.474200Z [BUGFIX] Pump Selection for Holding Pressure.....Merged revision 224 to Trunk: Felix.Neunkirchner 2024-02-02T08:49:37.442596Z [UPDATE] wjFlexIO show indicator instead of numerical input if "gSpare" structure is named "Digital"........Merged revision(s) 142 from trunk: Felix.Neunkirchner 2024-02-02T08:48:30.804332Z [UPDATE] wjGeneralFunctions only set ip address automatically in case of specific network adapter is existing........Merged revision(s) 140 from trunk: Sanghoon.Kim 2024-02-02T06:18:48.136408Z [FIX] Split injection buttons layout fix (by Mario) ........Merged revision(s) 144 from trunk: Sanghoon.Kim 2024-02-02T06:18:17.736238Z [FIX] Plaimm X logo style same for all 3 options (by Mario) ........Merged revision(s) 143 from trunk: Sanghoon.Kim 2024-02-02T06:17:31.997249Z [ADD] QR code for Woojin Plaimmm Speed Club (by Mario) ........Merged revision(s) 123 from trunk: Bozidar.Tomic 2024-02-01T15:34:36.294346Z [UPDATE] Lubrication text for TH/DL.....Merged revision 183 to Trunk: Bozidar.Tomic 2024-02-01T11:14:30.838643Z [UPDATE] IO page missing force signal added.....Merged revision 141 from Trunk: Sanghoon.Kim 2024-02-01T09:53:26.368134Z [UPDATE] Mold protection and evelope curve update (by Bozidar) ........Merged revision(s) 179 from trunk: Felix.Neunkirchner 2024-02-01T08:26:14.400701Z [UPDATE] io page was not accessible by user because of tabcontrol binding ........Merged revision(s) 160 from trunk: Felix.Neunkirchner 2024-02-01T08:25:24.338022Z [UPDATE] wjDropdown dataprovider fixed ........Merged revision(s) 154 from trunk: Felix.Neunkirchner 2024-02-01T08:24:49.102191Z [UPDATE] reset handshake signal for set time in eventbinding instead of c code (to make sure that eventbinding is triggered)........Merged revision(s) 151 from trunk: Felix.Neunkirchner 2024-02-01T08:24:09.398344Z [UPDATE] set windows/linux time based on time settings in plc (only working on image)........Merged revision(s) 145 from trunk: Sanghoon.Kim 2024-01-31T17:54:02.858522Z <Merged>[UPDATE] fix wrong alarm text in Korean.....Merged revision 174 to Trunk: Sanghoon.Kim 2024-01-31T17:28:02.382445Z <Merged>[BUGFIX] wrong text ID on Energy CT ratio dropdownlist.....Merged revision 172 to Trunk: Sanghoon.Kim 2024-01-31T17:20:06.190500Z <Merged>[UPDATE] separate footer button status for decompression and plasticizing.....Merged revision 171 to Trunk: Sanghoon.Kim 2024-01-31T17:06:46.993097Z <Merged>[ADD] add missing mold open delay timer for TH (missing only on TH).....Merged revision 170 to Trunk: Sanghoon.Kim 2024-01-31T16:54:51.744116Z <Merged>[UPDATE] Allow manual mode when mold height mode is active (only for TH, TH need manual mold height movement).....Merged revision 169 to Trunk: Sanghoon.Kim 2024-01-31T16:43:39.483474Z [REVERT] revert changes on Rev.158. (To avoid any problem on actual Samsung machine, Need to be tested and confirmed before commit on Tag1Beta).....No Need to Merge to Trunk Sanghoon.Kim 2024-01-31T15:29:31.246355Z <Merged>[BUGFIX] bugfix of limitation settings (nozzle contact pressure, oil cooling/heating temperature).....Merged revision 168 to Trunk: Albin.Kroell 2024-01-30T15:25:14.163148Z <Merged>[UPDATE] reworked Service Login, removed users "wj" and "1", added Service Quick Login, and activated dynamic password for user "Service" --> Creation of Dynamic Password described in Service Manual 9.16 on page 83 Sanghoon.Kim 2024-01-30T15:22:36.538653Z <Merged>[UPDATE] Update Handling of Dyn IO Config, IO Info with DataObject / Part2.....Merged revision 162 to Trunk: Sanghoon.Kim 2024-01-30T12:46:38.521392Z <Merged>[UPDATE] Update Handling of Dyn IO Config, IO Info with DataObject.....Merged revision 162 to Trunk: Joerg.Emmerling 2024-01-29T17:53:02.071877Z <Merged>[UPDATE] Improve Loading process of Dyn IO.....Merged revision 162 to Trunk: Sanghoon.Kim 2024-01-29T13:20:36.405636Z <Merged>[UPDATE] Pressure on AC131 (update).....Merged revision 150 to Trunk: Sanghoon.Kim 2024-01-29T12:42:09.747322Z <Merged>[BUGFIX] wrong speed calculation for injection.....Merged revision 147 to Trunk: TaeHwanRow 2024-01-26T02:00:55.057699Z <Merged>[UPDATE] ADD 8C75R15_3 SERVO PUMP .....Merged revision 148 to Trunk: Sanghoon.Kim 2024-01-25T18:45:57.157653Z <Merged>[UPDATE] minor update for wjSPcon.....Merged revision 137 to Trunk: Sanghoon.Kim 2024-01-25T18:10:35.321015Z <Merged>[UPDATE] motion state for BR drive, remove unused part.....Merged revision 137 to Trunk: Sanghoon.Kim 2024-01-25T14:27:14.002005Z <Merged>[UPDATE] pump parameterSet for negative movement (same as positive direciton).....Merged revision 137 to Trunk: Sanghoon.Kim 2024-01-25T13:00:00.403986Z <Merged>[UPDATE] improve the TH valve Linearization.....Merged revision 136 to Trunk: Sanghoon.Kim 2024-01-25T10:40:26.599834Z <Merged>[UPDATE] improve valve linearization.....Merged revision 136 to Trunk: Patrik.Tasch 2024-01-25T10:38:57.627086Z <Merged>[BUGFIX] Bugfixes during Korea Visit.....Merged revision 135 to Trunk: Albin.Kroell 2024-01-24T10:37:07.683275Z <Merged>[UPDATE] removed SbAccSpeedChange again .....Merged revision 127 to Trunk: Patrik.Tasch 2024-01-24T06:47:29.841485Z <Merged>[BUGFIX] Some Bugfixes during Korea Tests.....Merged revision 135 to Trunk: Albin.Kroell 2024-01-23T14:44:34.839745Z <Merged>[UPDATE] added Options from TH in Visu and checked OPCUA for Units.....Merged revision 124 from Trunk: Sanghoon.Kim 2024-01-22T14:16:27.919864Z <Merged>[UPDATE] To avoid warning for Flex_Config.....Merged revision 122 to Trunk: Sanghoon.Kim 2024-01-22T10:19:02.590807Z <Merged>[BUGFIX] Bugfix of Clamp Pressure Scaling of kN, Ton, Bar.....Merged revision 116 to Trunk: Sanghoon.Kim 2024-01-22T10:18:20.789223Z <Merged>[UPDATE] added empty Motion folder to every config to prevent problems with REF_CON.....Merged revision 113 to Trunk: Sanghoon.Kim 2024-01-22T10:15:00.258315Z [ADD] create beta version Sanghoon.Kim 2024-01-18T13:56:49.947487Z [UPDATE] visu-pump selection page (hide halfnut/tiebar for machine type) Sanghoon.Kim 2024-01-18T13:27:28.571353Z [UPDATE] Visu update for pump selection page (do not hide the core setting) ChanghakYeo 2024-01-18T11:10:07.228634Z [UPDATE] change IO name (Clamp Safety Valve for TH) Sanghoon.Kim 2024-01-18T10:12:35.093455Z [UPDATE] THA5-2nd pump do not use the suction line input. Sanghoon.Kim 2024-01-18T09:38:19.564083Z [UPDATE] update for missing alarms for pump (mainly for B&R drive) Moritz.Wurian 2024-01-18T08:00:36.611885Z [UPDATE] Option: pump pressure with B&R AC131 card adjusted Sanghoon.Kim 2024-01-17T17:04:44.849014Z [ADD] add missing alarms for pump (mainly for B&R drive) Felix.Neunkirchner 2024-01-17T16:47:53.148372Z [UPDATE] executed copy from REF_CON exe file Felix.Neunkirchner 2024-01-17T16:40:35.317922Z [UPDATE] removed these files from other configs Felix.Neunkirchner 2024-01-17T16:39:41.574724Z [UPDATE] removed unused files from REF_CON Felix.Neunkirchner 2024-01-17T16:38:26.053080Z [UPDATE] removed these files from other configs Felix.Neunkirchner 2024-01-17T16:36:37.674709Z [UPDATE] removed unused files from REF_CON Felix.Neunkirchner 2024-01-17T16:21:08.929616Z [UPDATE] removed unused folder "TestVisu" Felix.Neunkirchner 2024-01-17T16:19:15.842114Z [UPDATE] removed unused folder "TestVisu" Sanghoon.Kim 2024-01-17T15:35:48.476551Z [ADD] add missing reference Sanghoon.Kim 2024-01-17T15:34:27.457267Z [UPDATE] TH machine have only one motor magnet switch. Do not need to be separated. Sanghoon.Kim 2024-01-17T15:16:42.844143Z [UPDATE] Add missing Acp10sys.br Moritz.Wurian 2024-01-17T10:30:42.429882Z [UPDATE] Option: pump pressure with B&R AC131 card adjusted Moritz.Wurian 2024-01-17T08:24:33.074563Z [UPDATE] Option: pump pressure with B&R AC131 card Elia.Brugger 2024-01-16T17:26:22.313450Z [UPDATE] c300_01 Holding Pressure Box dynamic height Elia.Brugger 2024-01-15T15:33:14.530311Z [UPDATE] layout of c10501 and timestamp style in 'build batch' changed Sanghoon.Kim 2024-01-15T13:29:47.655428Z [UPDATE] update for config CP1686X_DLA5_Superfoam (add acp10sys.br) Sanghoon.Kim 2024-01-15T10:51:06.979462Z [UPDATE] update for config CP1686X_DLA5_Superfoam Sanghoon.Kim 2024-01-15T10:30:38.351812Z [ADD] add missing binding reference Sanghoon.Kim 2024-01-15T10:10:55.531826Z [ADD] Add config CP1686X_DLA5_Superfoam (for test in HQ) Elia.Brugger 2024-01-12T14:20:04.683844Z [UPDATE] layout of c10501 changed Patrik.Tasch 2024-01-11T12:51:52.601098Z [ADD] Interface for Option O8A200 Edge Device Joerg.Emmerling 2024-01-11T11:25:17.694376Z [BUGFIX] Software update Funktion Elia.Brugger 2024-01-10T15:29:31.970188Z [BUGFIX] Holding Pressure Graph Y-Axis Unit Elia.Brugger 2024-01-10T15:17:45.801628Z [BUGFIX] Holding Pressure Graph Y-Axis Unit Bozidar.Tomic 2024-01-10T15:13:17.712288Z [UPDATE] OPCUA gspare signal enabled Elia.Brugger 2024-01-10T15:11:41.195636Z [ADD] Holding Pressure Graph Y-Axis Unit Joerg.Emmerling 2024-01-10T14:15:02.233826Z [UPDATE] Improve startup condition mold close (TH) Patrik.Tasch 2024-01-10T09:06:09.141168Z [BUGFIX] Core Interlock SmartSequenzer Sanghoon.Kim 2024-01-09T16:11:55.918108Z [BUGFIX] Clamp Process movement with AUT_PAR.SbCoreViaKey == 0 Elia.Brugger 2024-01-09T11:17:29.427818Z [BUGFIX] Injection Graph Binding Unit X-Achsis Patrik.Tasch 2024-01-09T09:36:54.207779Z [BUGFIX] Core Interlock SmartSequenzer Elia.Brugger 2024-01-09T08:29:49.721042Z [ADD] Fixpages Parameter 'Prop Valve End Deceleration' for TH only Bozidar.Tomic 2024-01-08T14:00:41.054034Z [UPDATE] Software update condition added Elia.Brugger 2024-01-05T11:42:59.185552Z [BUGFIX] Compile Timestamp Display Joerg.Emmerling 2024-01-05T06:53:14.687865Z [BUGFIX] @Richard Wagner MouldLookUp brake ramp Felix.Neunkirchner 2024-01-04T15:43:53.036240Z [UPDATE] mold 2 page profile steps reverted to old concept Felix.Neunkirchner 2024-01-04T15:21:39.008848Z [UPDATE] ejector page profile steps reverted to old concept Felix.Neunkirchner 2024-01-04T14:57:51.265970Z [UPDATE] injection page profile steps reverted to old concept Felix.Neunkirchner 2024-01-04T14:16:51.245383Z [UPDATE] mould page profile steps reverted to old concept Elia.Brugger 2024-01-04T14:06:16.701239Z [ADD] Maximum Airblows Extented to 8 Elia.Brugger 2024-01-03T10:07:06.355555Z [BUGFIX] Firmwarepage Screw Speed Binding Joerg.Emmerling 2024-01-03T09:33:41.587277Z [BUGFIX] calculation ApLock_spec Amin.Adra 2024-01-02T15:42:01.380750Z [UPDATE] Rotary, hide step when disabled. Bozidar.Tomic 2023-12-22T08:16:01.056056Z [FIX] Software update variable issue Bozidar.Tomic 2023-12-21T12:06:41.005827Z [UPDATE] Software update added step for checking file Bozidar.Tomic 2023-12-20T11:51:52.080971Z [UPDATE] Envelop curve update Moritz.Wurian 2023-12-19T08:09:31.661700Z [Update] Suppress Error 326 in Simulation Moritz.Wurian 2023-12-19T08:07:34.207453Z [FIX] IPA/IPB carriage lock pressure Patrik.Tasch 2023-12-19T07:36:34.469832Z [UPDATE] Profile Start Position Elia.Brugger 2023-12-18T16:07:12.187815Z [ADD] Firmwarepage C105_01 machine data added Patrik.Tasch 2023-12-18T14:10:03.516155Z [UPDATE] Profile Start Position Bozidar.Tomic 2023-12-18T13:13:55.564036Z [ADD] Flex config APC PPC Felix.Neunkirchner 2023-12-18T08:41:37.809644Z [UPDATE] added files to ignore list Sanghoon.Kim 2023-12-15T11:24:43.474186Z [BUGFIX] Missing of data copy (Decompression Enable) Richard.Wagner 2023-12-15T10:06:38.488137Z [INITIAL] Update to latest Version Richard.Wagner 2023-12-14T11:51:05.416534Z [INITIAL] DL trunk VisualSVN Server 2023-12-14T10:39:56.410545Z Created folder 'trunk'.