Option: Cavity Pressure Sensor (07A441)
1. Machine Option 2. User Settings (Injection / Cavity Pressure Settings page) 2.1 Cavity Pressure Settings 2.1.1 Cavity Pressure Settings […]
IMM A5 Manual, IMM A5
IMM
IMM A5 Manual, IMM A5
Option: HotWater Unit (06A746)
This function is used to interface with an additional Hot Water Unit (mold temperature control unit).At the moment, this option
IMM A5 Manual, IMM A5
Option: Degasing (03A303)
The Degassing Function is typically used after injection to remove residual gas, moisture, or to enable foaming inside the mold.
IMM A5 Manual, IMM A5, IMM
[IMC400]Dynamic Hardware Configuration Manual
1. Screen Click Dynamic Hardware Configuration on the maintenance page. 2. Configuration 3. Adding Cards (Manual Setting) Example:Default Card +
IMM A5 Manual, How-to-Guides Linux, A5 Maintenance Manual
Rotate Screen on Linux
Note: This setup is only applicable for linux image versions >=9.When a new image is installed on the HMI PC,
How-to-Guides Linux, IMM A5 Manual, A5 Maintenance Manual
USB Tethering on Linux
Step 1: Connect your phone to the HMI PC using a USB cable. Step 2: On your phone, tap the
IMM A5 Manual, IMM A5, IMM
Option: Lubrication (Greasing) (08A050 ~ 08A055)
Option Selection on Fixdata This page allows the user to configure lubrication (greasing) settings for different parts of the machine.
Maintenance Manual, IMM A5 Firmware, IMM, A5 Maintenance Manual, IMM A5 Firmware IMC5xx
Closed Loop Injection
For closed loop injction recommended PID settings PID Kp 0.2PID Ki 0.01 (tn)
IMM A5 Firmware IMC5xx, A5 Maintenance Manual
Dynamic Configuration(wjFlexConfig) Software User Manual (IO Configuration)_Global_Release
name File Dynamic Configuration(wjFlexConfig) File download path Download (V1.8.8) manual video https://www.woojin.help/wp-content/uploads/2025/06/Dynamic-Configuration-video.mp4